**CÁRACH, J. – **HLOCH, S. – **PETRŮ, J. – MÜLLER, M. – HROMASOVÁ, M. – **NAG, A. – **ČUHA, D. – **HLAVÁČEK, P. – **HATALA, M. – **KRATOCHVÍL, J. – **RUGGIERO, A. Evaluation of physical phenomena and surface integrity during hydroabrasive disintegration of the rotating workpiece with feedback loop control. MEASUREMENT, 2019, roč. 134, č. FEB 2019, s. 586-594. ISSN: 0263-2241.
**RAJ, P. – **HLOCH, S. – **TRIPATHI, R. – **SRIVASTAVA, M. – **NAG, A. – **KLICHOVÁ, D. – **KLICH, J. – HROMASOVÁ, M. – MÜLLER, M. – LINDA, M. – **CHATTOPADHYAYA, S. – **ADAMCIK, P. Investigation of sandstone erosion by continuous and pulsed water jets. Journal of Manufacturing Processes, 2019, roč. 2019, č. 42, s. 121-130. ISSN: 1526-6125.
KABUTEY, A. – HERÁK, D. – MIZERA, Č. – HRABĚ, P. Theoretical analysis of force, pressure and energy distributions of bulk oil palm kernels along the screwline of a mechanical screw press FL 200. Agronomy Research, 2019, roč. 17, č. 5, s. 1927-1941. ISSN: 1406-894X.
**KATINAS, E. – CHOTĚBORSKÝ, R. – LINDA, M. – **JANKAUSKAS, V.; idPublikace = 79836; Název: Wear modelling of soil ripper tine in sand and sandy clay by discrete element method-- Neexistuje podtyp publikace --
**NAG, A. – **HLOCH, S. – **ČUHA, D. – **DIXIT, A. – **TOZAN, H. – **PETRŮ, J. – HROMASOVÁ, M. – MÜLLER, M. Acoustic chamber length performance analysis in ultrasonic pulsating water jet erosion of ductile material . Journal of Manufacturing Processes, 2019, roč. 47, č. listopad, s. 347-356. ISSN: 1526-6125.
MÜLLER, M. – KOLÁŘ, V. – VALÁŠEK, P. Effect of Waterjet Machining Parameters on Cut Quality of Polymeric Composite Materials Based on Biological Reinforcement in Form of Cotton Post-harvest Line Residues. Manufacturing Technology, 2019, roč. 19, č. 4, s. 647-654. ISSN: 1213-2489.
KOLÁŘ, V. – MÜLLER, M. – TICHÝ, M. – **RUDAWSKA, A. – HROMASOVÁ, M. Influence of Preformed Adherent Angle and Reinforcing Glass Fibre on tensile strength of Hybrid Adhesive Bond. Manufacturing Technology, 2019, roč. 19, č. 5, s. 786-791. ISSN: 1213-2489.
KUŘE, J. – **HÁJKOVÁ, L. – HROMASOVÁ, M. – CHOTĚBORSKÝ, R. – LINDA, M. Discrete element simulation of rapeseed shear test. Agronomy Research, 2019, roč. 17, č. 2, s. 551-558. ISSN: 1406-894X.
KOLÁŘ, V. – TICHÝ, M. – MÜLLER, M. – VALÁŠEK, P. – **RUDAWSKA, A. Research on influence of cyclic degradation process on changes of structural adhesive bonds mechanical properties. Agronomy Research, 2019, roč. 17, č. S1, s. 1062-1070. ISSN: 1406-894X.
**HLOCH, S. – **ADAMCIK, P. – **NAG, A. – **SRIVASTAVA, M. – **ČUHA, D. – MÜLLER, M. – HROMASOVÁ, M. – **KLICH, J. Hydrodynamic ductile erosion of aluminium by a pulsed water jet moving in an inclined trajectory. WEAR, 2019, roč. 428, č. JUN, s. 178-192. ISSN: 0043-1648.
KEŠNER, A. – CHOTĚBORSKÝ, R. – LINDA, M. – HROMASOVÁ, M. Methodology of the stress detemination in the tool module during the work of the agriculture machine. Agronomy Research, 2019, roč. 17, č. 2, s. 481-490. ISSN: 1406-894X.
KOLÁŘ, V. – TICHÝ, M. – MÜLLER, M. Mechanical properties of polymeric composite based on pine seeds production residues . Manufacturing Technology, 2019, roč. 19, č. 3, s. 426-430. ISSN: 1213-2489.
**KOLAŘÍKOVÁ, M. – CHOTĚBORSKÝ, R. – HROMASOVÁ, M. – LINDA, M. THE CHARACTERISTICS OF Al-Si COATING ON STEEL 22MnB5 DEPENDING ON THE HEAT TREATMENT. ..., 2019, roč. 59, č. 4, s. 352-358. ISSN: N.
GÜRDIL, G. – KABUTEY, A. – SELVI, K. – HRABĚ, P. – HERÁK, D. – FRAŇKOVÁ, A. Investigation of Heating and Freezing Pretreatments on Mechanical, Chemical and Spectral Properties of Bulk Sunflower Seeds and Oil. Processes, 2020, roč. 8, č. 4, s. 1-20. ISSN: 2227-9717.
AL-KHALED, A. – KABUTEY, A. – MIZERA, Č. – HRABĚ, P. – HERÁK, D. Modelling of hot-air and vacuum drying of persimmon fruit (Diospyros kaki) using computational intelligence methods. Agronomy Research, 2020, roč. 18, č. S2, s. 1323-1335. ISSN: 1406-894X.
AL-KHALED, A. – KABUTEY, A. – SELVI, K. – MIZERA, Č. – HRABĚ, P. – HERÁK, D. Application of Computational Intelligence in Describing the Drying Kinetics of Persimmon Fruit (Diospyros kaki) During Vacuum and Hot Air Drying Process. Processes, 2020, roč. 8, č. 5, s. 1-21. ISSN: 2227-9717.
TICHÝ, M. – KOLÁŘ, V. – MÜLLER, M. – MISHRA, R. – ŠLEGER, V. – HROMASOVÁ, M. Quasi-Static Shear Test of Hybrid Adhesive Bonds Based on Treated Cotton-Epoxy Resin Layer. POLYMERS, 2020, roč. 12, č. 12, s. 2945-2959. ISSN: 2073-4360.
MÜLLER, M. – TICHÝ, M. – ŠLEGER, V. – HROMASOVÁ, M. – KOLÁŘ, V. Research of Hybrid Adhesive Bonds with Filler Based on Coffee Bean Powder Exposed to Cyclic Loading. Manufacturing Technology, 2020, roč. 20, č. 5, s. 646-654. ISSN: 1213-2489.
MISHRA, R. – **BEHERA, B. – **RAJPUROHIT, A. – **BEHERA, P. – **PETRŮ, M. – MÜLLER, M. Effect of internal mold release agent on flexural and inter laminar shear properties of carbon and glass fabric reinforced thermoset composites. POLYMERS FOR ADVANCED TECHNOLOGIES, 2020, roč. neuvedeno, č. neuvedeno, s. 0-0. ISSN: 1042-7147.
**RUDAWSKA, A. – **SIKORA, J. – MÜLLER, M. – VALÁŠEK, P. The effect of environmental ageing at lower and sub-zero temperatures on the adhesive joint strength. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2020, roč. 97, č. 102487, s. 0-0. ISSN: 0143-7496.
BRUNEROVÁ, A. – MÜLLER, M. – **GÜRDIL, G. – ŠLEGER, V. – BROŽEK, M. Analysis of physical-mechanical properties of pelleted chicken litter organic fertilizer. Research in Agricultural Engineering (Zemědělská technika), 2020, roč. 66, č. 4, s. 131-139. ISSN: 1212-9151.
**MITURSKA,, I. – **RUDAWSKA, A. – MÜLLER, M. – VALÁŠEK, P. The Influence of Modification with Natural Fillers on the Mechanical Properties of Epoxy Adhesive Compositions after Storage Time. Materials, 2020, roč. 13, č. 2, s. 0-0. ISSN: 1996-1944.
**JAMSHAID, H. – MISHRA, R. – **BASRA, S. – **RAJPUT, A. – **HASSAN, T. – **PETRŮ, M. – CHOTĚBORSKÝ, R. – MÜLLER, M. Lignocellulosic Natural Fiber Reinforced Bisphenol F Epoxy Based Bio-composites: Characterization of Mechanical Electrical Performance. Journal of Natural Fibers, 2020, roč. neuvedeno, č. neuvedeno, s. 0-0. ISSN: 1544-0478.
**MILOSEVIC, M. – VALÁŠEK, P. – **RUGGIERO, A. Tribology of Natural Fibers Composite Materials: An Overview. Lubricants, 2020, roč. 8, č. 4, s. 0-0. ISSN: 2075-4442.
MISHRA, R. – **JAMSHAID, H. – **BASRA, S. – **JIANG, G. – **GAO, Z. – **MA, P. – **PETRU, M. – **RAZA, A. – MÜLLER, M. Effect of Stitch Characteristics on Flammability and Thermo-Physiological Comfort Properties of Knitted Fabrics. FIBERS AND POLYMERS, 2020, roč. 21, č. 11, s. 2652-2663. ISSN: 1229-9197.
**HASSAN, T. – **JAMSHAID, H. – MISHRA, R. – **KHAN, M. – **PETRŮ, PH.D., d. – **NOVÁK, J. – CHOTĚBORSKÝ, R. – HROMASOVÁ, M. Acoustic, Mechanical and Thermal Properties of Green Composites Reinforced with Natural Fibers Waste. POLYMERS, 2020, roč. 12, č. 3, s. 0-0. ISSN: 2073-4360.
BRUNEROVÁ, A. – ROUBÍK, H. – BROŽEK, M. – **HARYANTO, A. – **HASANUDIN, U. – **IRYANI, D. – HERÁK, D. Valorization of Bio-Briquette Fuel by Using Spent Coffee Ground as an External Additive. Energies, 2020, roč. 13, č. 1, s. 1-15. ISSN: 1996-1073.
**HLOCH, S. – **SRIVASTAVA, M. – **NAG, A. – MÜLLER, M. – HROMASOVÁ, M. – **SVOBODOVA, J. – **KRUML, T. – **CHLUPOVA, A. Effect of pressure of pulsating water jet moving along stair trajectory on erosion depth, surface morphology and microhardness. WEAR, 2020, roč. 452, č. JUL 15 2020, s. 0-0. ISSN: 0043-1648.
HNÍZDIL, P. – CHOTĚBORSKÝ, R. – KUŘE, J. Utilization of fused deposition method 3d printing for evaluation of discrete element method simulations. Agronomy Research, 2020, roč. 18, č. Special Issue 1, s. 842-851. ISSN: 1406-894X.
KOLÁŘ, V. – MÜLLER, M. – MISHRA, R. – **RUDAWSKA, A. – ŠLEGER, V. – TICHÝ, M. – HROMASOVÁ, M. – VALÁŠEK, P. Quasi-Static Tests of Hybrid Adhesive Bonds Based on Biological Reinforcement in the Form of Eggshell Microparticles. POLYMERS, 2020, roč. 12, č. 6, s. 0-0. ISSN: 2073-4360.
**RUDAWSKA, A. – **STANČEKOVA, D. – MÜLLER, M. – **VITENKO, T. – **IASNII, V. The Strength of the Adhesive Joints of the Medium-Density Fireboards and Particle Boards with the PVC Film. Advances in Science and Technology Research Journal, 2020, roč. 14, č. 1, s. 58-68. ISSN: 2299-8624.
**AZAM, Z. – **JAMSHAID, H. – **NAWAB, Y. – MISHRA, R. – MÜLLER, M. – CHOTĚBORSKÝ, R. – KOLÁŘ, V. – TICHÝ, M. – **PETRU, M. Influence of inlay yarn type and stacking sequence on mechanical performance of knitted uni-directional thermoplastic composite prepregs. Journal of Industrial Textiles, 2020, roč. neuvedeno, č. neuvedeno, s. 0-0. ISSN: 1528-0837.
**RUDAWSKA, A. – **WAHAB, M. – MÜLLER, M. Effect of ageing process on mechanical properties of adhesive tubular butt joints in aqueous environment . INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2020, roč. 96, č. leden 2020, s. 0-0. ISSN: 0143-7496.
BRUNEROVÁ, A. – ROUBÍK, H. – BROŽEK, M. – **DUNG, D. – **PHUNG, L. – **HASANUDIN, U. – **IRYANI, D. – HERÁK, D. Briquetting of sugarcane bagasse as a proper waste management technology in Vietnam. WASTE MANAGEMENT & RESEARCH, 2020, roč. neuvedeno, č. neuvedeno, s. 1-12. ISSN: 0734-242X.
MÜLLER, M. – **RUDAWSKA, A. – TICHÝ, M. – KOLÁŘ, V. – HROMASOVÁ, M. Research on wear resistance of polymeric composite materials based on microparticles from tyre recyclation process. Manufacturing Technology, 2020, roč. 20, č. 2, s. 223-228. ISSN: 1213-2489.
**SEZGIN, H. – MISHRA, R. – **MILITKÝ, J. – **BERKALP, B. Thermal and thermo-mechanical characterization of MWCNTs integrated E-glass/carbon fabric reinforced composites. Journal of Industrial Textiles, 2020, roč. neuvedeno, č. neuvedeno, s. 0-0. ISSN: 1528-0837.
MISHRA, R. – **JAMSHAID, H. – **YOSFANI, S. – **HUSSAIN, U. – **NADEEM, M. – **PETRU, M. – TICHÝ, M. – MÜLLER, M. Thermo physiological comfort of single jersey knitted fabric derivatives. Fashion and Textiles, 2021, roč. 8, č. 40, s. 0-0. ISSN: 2198-0802.
KATINAS, E. – CHOTĚBORSKÝ, R. – LINDA, M. – KUŘE, J. Sensitivity analysis of the influence of particle dynamic friction, rolling resistance and volume/shear work ratio on wear loss and friction force using DEM model of dry sand rubber wheel test. TRIBOLOGY INTERNATIONAL, 2021, roč. 156, č. duben, s. 0-0. ISSN: 0301-679X.
**MITURSKA, I. – **RUDAWSKA, A. – MÜLLER, M. – HROMASOVÁ, M. The influence of mixing methods of epoxy composition ingredients on selected mechanical properties of modified epoxy construction materials. Materials, 2021, roč. 14, č. 2, s. 0-0. ISSN: 1996-1944.
MISHRA, R. – **BEHERA, B. – MÜLLER, M. – **PETRU, M. Finite element modeling based thermodynamic simulation of aerogel embedded nonwoven thermal insulation material. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2021, roč. 164, č. Jun 2021, s. 0-0. ISSN: 1290-0729.
MISHRA, R. – **BEHERA, B. – **MUKHERJEE, S. – **PETRU, M. – MÜLLER, M. Axial and Radial Compression Behavior of Composite Rocket Launcher Developed by Robotized Filament Winding: Simulation and Experimental Validation. POLYMERS, 2021, roč. 13, č. 4, s. 0-0. ISSN: 2073-4360.
VALÁŠEK, P. – MÜLLER, M. – ŠLEGER, V. – KOLÁŘ, V. – HROMASOVÁ, M. – **RUGGIERO, A. – **D´AMATO, R. Influence of Alkali Treatment on the Microstructure and Mechanical Properties of Coir and Abaca Fibers. Materials, 2021, roč. 14, č. 10-2636, s. 0-0. ISSN: 1996-1944.
**HLAVÁČEK, P. – **HLOCH, S. – **NAG, A. – **PETRU, J. – MÜLLER, M. – HROMASOVÁ, M. – **SRNICEK, P. Effect of rotation direction, traverse speed, and abrasive type during the hydroabrasive disintegration of a rotating Ti6Al4V workpiece. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2021, roč. 235, č. 11, s. 1848-1860. ISSN: 0954-4054.
**JAMSHAID, H. – MISHRA, R. – **ZEESHAN, M. – **ZAHID, B. – **BASRA, S. – TICHÝ, M. – MÜLLER, M. Mechanical Performance of Knitted Hollow Composites from Recycled Cotton and Glass Fibers for Packaging Applications. POLYMERS, 2021, roč. 13, č. 14, s. 0-0. ISSN: 2073-4360.
**TUFAIL, M. – **JAMSHAID, H. – MISHRA, R. – **HUSSAIN, U. – TICHÝ, M. – MÜLLER, M. Characterization of Hybrid Composites with Polyester Waste Fibers, Olive Root Fibers and Coir Pith Micro-Particles Using Mixture Design Analysis for Structural Applications. POLYMERS, 2021, roč. 13, č. 14, s. 0-0. ISSN: 2073-4360.
KEŠNER, A. – CHOTĚBORSKÝ, R. – LINDA, M. – HROMASOVÁ, M. – KATINAS, E. – **SUTANTO, H. Stress distribution on a soil tillage machine frame segment with a chisel shank simulated using discrete element and finite element methods and validate by experiment. Biosystems Engineering, 2021, roč. 209, č. , s. 125-138. ISSN: 1537-5110.
KOLÁŘ, V. – MÜLLER, M. – TICHÝ, M. – MISHRA, R. – HRABĚ, P. – HANUŠOVÁ, K. – HROMASOVÁ, M. Experimental Investigation of Wavy-Lap Bonds with Natural Cotton Fabric Reinforcement under Cyclic Loading. POLYMERS, 2021, roč. 13, č. 17, s. 0-0. ISSN: 2073-4360.
**KAMBLE, Z. – **BEHERA, B. – MISHRA, R. – **BEHERA, P. Influence of cellulosic and non-cellulosic particle fillers on mechanical, dynamic mechanical, and thermogravimetric properties of waste cotton fibre reinforced green composites. COMPOSITES PART B-ENGINEERING, 2021, roč. 207, č. 15 FEB, s. 0-0. ISSN: 1359-8368.
**YANG, T. – **HU, L. – **XIONG, X. – **WANG, Y. – **WANG, X. – **ZHANG, S. – MISHRA, R. – **MILITKÝ, J. A comparison of fabric structures for carbon fiber reinforced composite: Laminated and orthogonal woven structures. POLYMER COMPOSITES, 2021, roč. 42, č. 10, s. 5300-5309. ISSN: 0272-8397.
**YANG, T. – **HU, L. – **PETRŮ, M. – **WANG, X. – **XIONG, X. – **YU, D. – MISHRA, R. – **MILITKÝ, J. Determination of the permeability coefficient and airflow resistivity of nonwoven materials. TEXTILE RESEARCH JOURNAL, 2021, roč. neuvedeno, č. neuvedeno, s. 0-0. ISSN: 0040-5175.
**PARIKSHIT, P. – MISHRA, R. – **BEHERA, B. Acoustic behaviour of textile structures. Textile Progress, 2021, roč. 53, č. 1, s. 0-0. ISSN: 0040-5167.
KUŘE, J. – LINDA, M. – CHOTĚBORSKÝ, R. – ČERNILOVÁ, B. – HROMASOVÁ, M. DEM modelling of tillage tools in sand and verification of draft forces in the soil box. Agronomy Research, 2021, roč. 19, č. 4, s. 1813-1822. ISSN: 1406-894X.
MÜLLER, M. – KOLÁŘ, V. – **ŠULC, J. – MISHRA, R. – HROMASOVÁ, M. – **BEHERA, B. Effect of Waterjet Machining Parameters on the Cut Quality of PP and PVC-U Materials Coated with Polyurethane and Acrylate Coatings. Materials, 2021, roč. 14, č. 24, s. 0-0. ISSN: 1996-1944.
KABUTEY, A. – MIZERA, Č. – DAJBYCH, O. – HRABĚ, P. – HERÁK, D. – DEMIREL, C. Modelling and optimization of processing factors of pumpkin seeds oil extraction under uniaxial loading. Processes, 2021, roč. 9, č. 3, s. 1-27. ISSN: 2227-9717.
DEMIREL, C. – KABUTEY, A. – HERÁK, D. – HRABĚ, P. – MIZERA, Č. – DAJBYCH, O. Optimizing uniaxial oil extraction of bulk rapeseeds; spectrophotometric and chemical analyses of the extracted oil under pretreatment temperatures and heating intervals. Processes, 2021, roč. 9, č. 10, s. 1-26. ISSN: 2227-9717.
MIZERA, Č. – HERÁK, D. – HRABĚ, P. – KABUTEY, A. Mathematical Models Describing the Creep and Stress Relaxation Behavior of False Banana's Fiber (Ensete Ventricosum). Journal of Natural Fibers, 2021, roč. 18, č. 4, s. 539-546. ISSN: 1544-0478.
**KAMBLE, Z. – MISHRA, R. – **BEHERA, B. – TICHÝ, M. – KOLÁŘ, V. – MÜLLER, M. Design, Development, and Characterization of Advanced Textile Structural Hollow Composites. POLYMERS, 2021, roč. 13, č. 20, s. 0-0. ISSN: 2073-4360.
**HAFSA, J. – MISHRA, R. – **HUSSAIN, U. – **RAJPUT, A. – TICHÝ, M. – MÜLLER, M. Natural Fiber Based Antibacterial, Wound Healing Surgical Sutures by the Application of Herbal Antimicrobial Compounds. Journal of Natural Fibers, 2022, roč. , č. , s. 0-0. ISSN: 1544-0478.
**AHMAD, T. – **JAMSHAID, H. – MISHRA, R. – VIJAY, C. – **NAZARI, S. – ALEXIOU IVANOVA, T. – **AHAMAD, N. – **AHMED, S. – **PETRŮ, M. – **KUČERA, L. Development of Lightweight Cricket Pads Using Knitted Flexible Thermoplastic Composites with Improved Impact Protection. Materials, 2022, roč. 15, č. 23, s. 0-0. ISSN: 1996-1944.
**HLOCH, S. – **SOUČEK, K. – **SVOBODOVÁ, J. – HROMASOVÁ, M. – MÜLLER, M. Subsurface microtunneling in ductile material caused by multiple droplet impingement at subsonic speeds. WEAR, 2022, roč. 490-491, č. FEB 15 2022, s. 0-0. ISSN: 0043-1648.
**JAMSHAID, H. – MISHRA, R. – **RAZA, A. – **HUSSAIN, U. – **RAHMAN, M. – NAZARI, S. – VIJAY, C. – MÜLLER, M. – CHOTĚBORSKÝ, R. Natural Cellulosic Fiber Reinforced Concrete: Influence of Fiber Type and Loading Percentage on Mechanical and Water Absorption Performance. Materials, 2022, roč. 15, č. 3, s. 0-0. ISSN: 1996-1944.
HRABĚ, P. – KOLÁŘ, V. – MÜLLER, M. – HROMASOVÁ, M. Service Life of Adhesive Bonds under Cyclic Loading with a Filler Based on Natural Waste from Coconut Oil Production. POLYMERS, 2022, roč. 14, č. 5, s. 0-0. ISSN: 2073-4360.
MÜLLER, M. – ŠLEGER, V. – KOLÁŘ, V. – HROMASOVÁ, M. – PIŠ, D. – MISHRA, R. Low-Cycle Fatigue Behavior of 3D-Printed PLA Reinforced with Natural Filler. POLYMERS, 2022, roč. 14, č. 7, s. 0-0. ISSN: 2073-4360.
**JAMSHAID, H. – MISHRA, R. – **AHMAD, N. – **NADEEM, M. – MÜLLER, M. – KOLÁŘ, V. Exploration of Effects of Graduated Compression Stocking Structures on Performance Properties Using Principal Component Analysis: A Promising Method for Simultaneous Optimization of Properties. POLYMERS, 2022, roč. 14, č. 10, s. 0-0. ISSN: 2073-4360.
BOŽÁK, T. – MÜLLER, M. – KOLÁŘ, V. – TICHÝ, M. – **SVOBODOVÁ, J. – **MICHNA, Š. Research on Low-Cycle Fatigue Engineered Hybrid Sandwich Ski Construction. POLYMERS, 2022, roč. 14, č. 11, s. 0-0. ISSN: 2073-4360.
MISHRA, R. – **BEHERA, B. – VIJAY, C. – NAZARI, S. – MÜLLER, M. Modeling and Simulation of Mechanical Performance in Textile Structural Concrete Composites Reinforced with Basalt Fibers. POLYMERS, 2022, roč. 14, č. 19, s. 0-0. ISSN: 2073-4360.
MÜLLER, M. – JIRKŮ, P. – ŠLEGER, V. – MISHRA, R. – HROMASOVÁ, M. – **NOVOTNÝ, J. Effect of Infill Density in FDM 3D Printing on Low-Cycle Stress of Bamboo-Filled PLA-Based Material. POLYMERS, 2022, roč. 14, č. 22, s. 0-0. ISSN: 2073-4360.
**KHALID, R. – **JAMSHAID, H. – MISHRA, R. – **MA, P. – **ZHU, G. Performance analysis of socks produced by auxetic yarns for protective applications. Journal of Industrial Textiles, 2022, roč. 54, č. 4, s. 6838-6863. ISSN: 1528-0837.
**RUDAWSKA, A. – **WAHAB, M. – MÜLLER, M. Strength of Epoxy-Bonded Aluminium Alloy Joints After Sandblasting. Advances in Science and Technology Research Journal, 2022, roč. 16, č. 2, s. 262-279. ISSN: 2299-8624.
**MILOSEVIC, M. – **DZUNIC, D. – VALÁŠEK, P. – **SLOBODAN, M. – **ALESSANDRO, R. Effect of Fiber Orientation on the Tribological Performance of Abaca-Reinforced Epoxy Composite under Dry Contact Conditions. Journal of Composites Science, 2022, roč. 6, č. 7, s. 0-0. ISSN: 2504-477X.
KATINAS, E. – CHOTĚBORSKÝ, R. Volume/shear work ratio influence on wear and stress of soil chisel tine modelled by DEM. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2022, roč. , č. , s. 0-0. ISSN: 1350-6501.
KOLÁŘ, V. – HRABĚ, P. – MÜLLER, M. – HROMASOVÁ, M. – HERÁK, D. – **SUTANTO, H. Influence of Alkali Treatment of Jatropha Curcas L. Filler on the Service Life of Hybrid Adhesive Bonds under Low Cycle Loading. POLYMERS, 2023, roč. 15, č. 2, s. 0-0. ISSN: 2073-4360.
MÜLLER, M. – HROMASOVÁ, M. – VALÁŠEK, P. – **NOVÁKOVÁ, I. – **MORAVEC, J. – **JELÍNEK, M. Tribological Behaviour of Enamel Coatings Created by a Prototype Device for Local Repair of Inorganic Surfaces. Materials, 2023, roč. 16, č. 3, s. 0-0. ISSN: 1996-1944.
**JAMSHAID, H. – MISHRA, R. – VIJAY, C. – NAZARI, S. – **SHOAIB, M. – **BIZET, L. – ALEXIOU IVANOVA, T. – MÜLLER, M. – VALÁŠEK, P. Mechanical and Thermo-Mechanical Performance of Natural Fiber-Based Single-Ply and 2-Ply Woven Prepregs. POLYMERS, 2023, roč. 15, č. 4, s. 0-0. ISSN: 2073-4360.
**JAMSHAID, H. – MISHRA, R. – VIJAY, C. – NAZARI, S. – **SHOAIB, M. – **BIZET, L. – JIRKŮ, P. – MÜLLER, M. – CHOTĚBORSKÝ, R. Hybrid Thermoplastic Composites from Basalt- and Kevlar-Woven Fabrics: Comparative Analysis of Mechanical and Thermomechanical Performance. POLYMERS, 2023, roč. 15, č. 7, s. 0-0. ISSN: 2073-4360.
**JAMSHAID, H. – MISHRA, R. – **KHAN, A. – VIJAY, C. – MÜLLER, M. – VALÁŠEK, P. Flammability and comfort properties of blended knit fabrics made from inherently fire-resistant fibers to use for fire fighters. Heliyon, 2023, roč. 9, č. 2, s. 0-0. ISSN: 2405-8440.
MISHRA, R. Advances in Textile Structural Composites. POLYMERS, 2023, roč. 4, č. 15, s. 808-810. ISSN: 2073-4360.
Článek ve sborníku z akce
BROŽEK, M. – NOVÁKOVÁ, A. Evaluation of Sintered Carbides Wear Resistance. In 7th International Scientific Conference "Engineering for Rural Development" 29.52008, Jelgava. Jelgava, Lotyšsko: Latvia University of Agriculture, Faculty of Engineering, 2008. s. 209 - 213.
NOVÁKOVÁ, A. – BROŽEK, M. Mechanical Properties of Pellets from Sorrel. In 7th International Scientific Conference "Engineering for Rural Development" 29.52008, Jelgava, Lotyšsko. Jelgava, Lotyšsko: Latvia University of Agriculture, Faculty of Engineering, 2008. s. 265 - 269.
Optimization of surface treatment parameters in adhesive bonding technology doc. Ing. Miroslav Müller, Ph.D., Ing. Petr Hrabě, Ph.D., doc. Ing. Rostislav Chotěborský, Ph.D., 2008
NOVÁKOVÁ, A. – BROŽEK, M. Bonding of non-metallic materials using thermoplastic adhesives. In 8th International Scientific Conference, Proceedings "Engineering for Rural Development" 28.52009, Jelgava, Latvia. Jelgava, Latvia: Latvia University of Agriculture, Faculty of Engineering, Institute of Mechanics, 2009. s. 261 - 264.
BROŽEK, M. – NOVÁKOVÁ, A. Soldering of steel using soft solders. In 8th International Scientific Conference, Proceedings "Engineering for Rural Development" 28.52009, Jelgava, Latvia. Jelgava, Latvia: Latvia University of Agriculture, Faculty of Engineering, Institute of Mechanics, 2009. s. 315 - 318.
BROŽEK, M. – NOVÁKOVÁ, A. Briquetting of chips from nonferrous metal. In 9th International Scientific Conference "Engineering for Rural Development" 27.52010, Lotyšsko (Latvia), Jelgava. Lotyšsko (Latvia), Jelgava: Latvia University of Agriculture, Faculty of Engineering, 2010. s. 236 - 241.
NOVÁKOVÁ, A. – BROŽEK, M. Evaluation of Helical Springs. In 9th International Scientific Conference "Engineering for Rural Development" 27.52010, Lotyšsko (Latvia), Jelgava. Lotyššsko (Latvia), Jelgava: Latvia University of Agriculture, Faculty of Engineering, 2010. s. 242 - 245.
MÜLLER, M. – VALÁŠEK, P. ADHESIVE BONDS DEGRADATION. In 9th International Scientific Conference Engineering for Rural Development 27.52010, Jelgava, Latvia. Jelgava: Latvia University of Agricultur, FAculty of Engineering, 2010. s. 49 - 52.
VALÁŠEK, P. – MÜLLER, M. POSSIBILITIES OF USE OF MECHANICAL SURFACE TREATMENT WASTE IN FORM OF POLYMERIC PARTICLE COMPOSITE FILLERS. In 9th International Scientific Conference Engineering for Rural Development 27.52010, Latvia, Jelgava. Latvia, Jelgava: Latvia University of Agricultur, Faculty of Engineering, 2010. s. 267 - 270.
BROŽEK, M. – NOVÁKOVÁ, A. – MIKUŠ, R. Study of wear resistance of hard facings using welding powders on the NiCrBSi basis. In Trends in Agricultural Engineering 2010 07.09.2010, Česká republika, Praha. Praha: Czech University of Life Sciences Prague, Faculty of Engineering, 2010. s. 115-118.
MÜLLER, M. – VALÁŠEK, P. – TOMEK, L. MECHANICAL PROPERTIES OF POLYMERIC PARTICLE COMPOSITES. In Trends in Agricultural Engineering 2010 07.09.2010, Praha. Praha: Czech University of Life Sciences Prague, Faculty of Engineering, 2010. s. 454-458.
MÜLLER, M. – RUŽBARSKÝ, J. – PAŠKO, J. – ŽARNOVSKÝ, J. – HRABĚ, P. THE QUALITY OF CUT SURFACE WITHOUT COOLING. In Trends in Agricultural Engineering 2010 07.09.2010, Praha. Praha: Czech University of Life Sciences Prague, Faculty of Engineering, 2010. s. 459-462.
VALÁŠEK, P. – MÜLLER, M. STATISTICAL COMPARISON OF THE HARDNESS OF POLYMERIC PARTICLE COMPOSITES WITH A FILLER ON THE BASIS OF WASTE FROM MECHANICAL SURFACE TREATMENT, CAUSED BY GRAVITATION INDUCED SEDIMENTATION. In Trends in Agricultural Engineering 2010 07.09.2010, Praha. Praha: Czech University of Life Sciences Prague, Faculty of Engineering, 2010. s. 623-626.
HRABĚ, P. – CHOTĚBORSKÝ, R. – RUŽBARSKÝ, J. – ŽARNOVSKÝ, J. COMPARISON OF HIGH CHROMIUM AND BORIDE HARDFACING. In Trends in Agricultural Engineering 2010 07.09.2010, Praha. Praha: Czech University of Life Sciences Prague, Faculty of Engineering, 2010. s. 228-231.
CHOTĚBORSKÝ, R. – RUSUL, A. – NAVRÁTILOVÁ, M. – HRABĚ, P. EFFECTS OF WELDING PROCESS PARAMETERS ON THE GEOMETRY AND DILUTION OF THE BEAD IN THE AUTOMATIC SURFACING. In Trends in Agricultural Engineering 2010 07.09.2009, Praha. Praha: Czech University of Life Sciences Prague, Faculty of Engineering, 2010. s. 244-247.
VALÁŠEK, P. – MÜLLER, M. Abrasive wear of polymeric particle composites with a filler on the basis of waste. In 6th International Scientific Conference on Tribology, BALTTRIB 2011 17.11.2011, Kaunas, Lithuania. Kaunas, Lithuania: Aleksandras Stulginskis University, 2011. s. 275-281.
BROŽEK, M. Quality evaluation of briquettes made from biomass. In The Fifth International Scientific Conference Rural Development in Global Changes 2011, Vol 5, Book 1 24.11.2011, Akademija, Kaunas District, Lithuania. Akademija, Kaunas District, Lithuania: Aleksandras Stulginskis University, 2011. s. 308-313.
MÜLLER, M. – VALÁŠEK, P. Influence of specific degradation agents of agricultural production on recycled plastics mechanical properties. In The Fifth International Scientific Conference Rural Development in Global Changes 2011, Vol 5, Book 1 24.11.2011, Akademija, Kaunas District, Lithuania. Akademija, Kaunas District, Lithuania: Aleksandras Stulginskis University, 2011. s. 384-388.
MÜLLER, M. POLYMERIC COMPOSITES BASED ON AL2O3 REINFORCING PARTICLES. In Engineering for Rural Development 26.05.2011, Jelgava. Jelgava: Latvia University of Agriculture, 2011. s. 423-427.
HENC, P. – CHOCHOLOUŠ, P. – MÜLLER, M. – KEJVAL, J. METHYLMETACRYLATE (ADHESIVE) – INFLUENCE OF CLIMATIC CONDITIONS ON PROPERTIES OF ADHESIVE BOND. In Engineering for Rural Development 26.05.2011, Jelgava. Jelgava: Latvia University of Agriculture, 2011. s. 398-401.
VALÁŠEK, P. Strength characteristics of polymer particle composites with filler on the basis of waste from mechanical surface treatment. In Engineering for Rural Development 26.05.2011, Jelgava. Jelgava: Latvia University of Agriculture, 2011. s. 434-439.
BROŽEK, M.; idPublikace = 61022; Název: LAYER NUMBER INFLUENCE ON WELD DEPOSIT CHEMICAL COMPOSITION-- Neexistuje podtyp publikace --
NOVÁKOVÁ, A. – BROŽEK, M. EVALUATION OF TEACHING THE SUBJECT “BASIC ENGINEERING TECHNOLOGIES”. In Engineering for Rural Development 26.05.2011, Jelgava. Jelgava: Latvia University of Agriculture, 2011. s. 542-547.
