**PETER, k. – **IVAN, J. – HOLÚBEK, M. – ČEDÍK, J. – PEXA, M. THE ACCURACY ASSESSMENT OF DEVICES USED FOR DISTANCE MEASURING IN DYNAMIC VEHICLE TESTS. Acta Technologica Agriculturae, 2022, roč. 25, č. 3, s. 150-156. ISSN: 1338-5267.
DÖRPMUND, M. – CAI, X. – WALGENBACH, M. – VONDŘIČKA, J. – SCHULZE LAMMERS, P. The Challenge of Cleaning Direct-Injection Systems for Pesticide Application. Transactions of the ASABE, 2012, roč. 55, č. 5, s. 1643-1650. ISSN: 2151- 0032.
HÖNIG, V. – ORSÁK, M. – PEXA, M. – LINHART, Z. The distillation characteristics of automotive gasoline containing biobutanol, bioethanol and the influence of the oxygenates. Agronomy Research, 2015, roč. 13, č. 2, s. 558-567. ISSN: 1406-894X.
VESELÁ, K. – PEXA, M. – MAŘÍK, J. The effect of biofuels on the quality and purity of engine oil . Agronomy Research, 2014, roč. 12, č. 2, s. 425-430. ISSN: 1406-894X.
PEXA, M. – MAŘÍK, J. The impact of biofuels and technical engine condition to its smoke - Zetor 8641 Forterra. Agronomy Research, 2014, roč. 12, č. 2, s. 367-372. ISSN: 1406-894X.
PETERKA, B. – PEXA, M. – ČEDÍK, J. – ALEŠ, Z. The influence of biobutanol on performance parameters of mobile generator. Agronomy Research, 2016, roč. 14, č. 1, s. 167-173. ISSN: 1406-894X.
PEXA, M. – ČEDÍK, J. – PETERKA, B. – HOLÚBEK, M. The operational parameters and emissions of portable generator after long-term operation on n-butanol. Agronomy Research, 2018, roč. 16, č. SI 1, s. 1190-1199. ISSN: 1406-894X.
**KOVAC, J. – **TAVODA, P. – **HAVRANEK, P. – **KRILEK, J. – ALEŠ, Z. The Operational Reliability Analysis of Machinery: A Case Study of Forest Forwarders and Their Technological Equipment. FORESTS, 2021, roč. 12, č. 4, s. 1-13. ISSN: 1999-4907.
VESELÁ, K. – PEXA, M. – PAVLŮ, J. The water content in the engine oil by using E85. Agronomy Research, 2016, roč. 14, č. 1, s. 297-302. ISSN: 1406-894X.
PAVLŮ, J. – HÖNIG, V. – ALEŠ, Z. – CHOTĚBORSKÝ, R. Tribodiagnostic analysis of motor oil after failure of turbocharger of combustion engine . Manufacturing Technology, 2016, roč. 16, č. 5, s. 1115-1122. ISSN: 1213-2489.
ALEŠ, Z. – PAVLŮ, J. – HROMASOVÁ, M. – **SVOBODOVÁ, J. Tribological properties of brass surfaces machined by abrasive - Free ultrasonic finishing process. Manufacturing Technology, 2019, roč. 19, č. 1, s. 3-8. ISSN: 1213-2489.
ALEŠ, Z. – PAVLŮ, J. – SVOBODOVÁ, J. – PEXA, M. Use of microscopy for morphology analysis of wear particles generated in the fuel systems of internal combustion engine. Manufacturing Technology, 2016, roč. 16, č. 5, s. 849-853. ISSN: 1213-2489.
PAVLŮ, J. – PEXA, M. – ČEDÍK, J. – JURČA, V. UTILIZATION OF OPERATIONAL PARAMETERS MONITORING TO ECONOMICAL AND SAFETY DRIVE OF VEHICLES. MM Science Journal, 2022, roč. 2022, č. MAR 2022, s. 5582-5588. ISSN: 1805-0476.
PAVLŮ, J. – ALEŠ, Z. – JURČA, V. Utilization of satellite monitoring for determination of optimal maintenance interval. Scientia Agriculturae Bohemica, 2013, roč. 44, č. 3, s. 159-166. ISSN: 1211-3174.
PORAZIL, J. – PEXA, M. – CINDR, M. VLIV KONTROLY BRZD NA BEZPEČNOST SILNIČNÍHO PROVOZU. Perner´s Contacts. , 2012, roč. 7, č. 1, s. 134-141. ISSN: 1801-674X .
HOLEK, M. – PEXA, M. – ALEŠ, Z. Vliv LaserNet Fines a dalších tribodiagnostických metod na údržbu kompresoru. Strojírenská technologie, 2010, roč. 15, č. 2, s. 8 - 15. ISSN: 1211-4162.
PETERKA, B. – PEXA, M. – ALEŠ, Z. – PAVLŮ, J. – VESELÁ, K. – ČEDÍK, J. Vliv n-butanolu na olejovou náplň spalovacího motoru. Listy cukrovarnické a řepařské, 2018, roč. 134, č. 3, s. 114-117. ISSN: 1210-3306.
ČEDÍK, J. – PETERKA, B. – MADER, D. Vliv n-butanolu na provozní parametry vznětového spalovacího motoru. Listy cukrovarnické a řepařské, 2018, roč. 134, č. 9-10, s. 328-331. ISSN: 1210-3306.
PEXA, M. – KUBÍN, K. VLIV PODÍLU BIOSLOŽKY V PALIVU NA SPOTŘEBU PALIVA A EMISE TRAKTORU ZETOR FORTERRA 8641. Agritech Science, 2010, roč. 4, č. 3, s. 1 - 5. ISSN: 1802-8942.
PEXA, M. – KUBÍN, K. Vliv podílu biosložky v palivu na výkon traktorového motoru. Mechanizace zemědělství, 2010, roč. 60, č. 12, s. 17 - 19. ISSN: 0373-6776.
MAYER, K. – PEXA, M. Význam intervalu měření v TPM. TZB-info, 2012, roč. 14, č. 26, s. 1-6. ISSN: 1801-4399.
PETERKA, B. – PETERKA, A. Základní technologické podmínky konzervace pícnin. Mechanizace zemědělství, 2010, roč. 60, č. 3, s. 62 - 63. ISSN: 0373-6776.
VESELÁ, K. – PEXA, M. – MAŘÍK, J. Změna viskozity motorového oleje při použití paliva E85. Listy cukrovarnické a řepařské, 2016, roč. 132, č. 7-8, s. 241-245. ISSN: 1210-3306.
PETERKA, B. – PETERKA, A. Způsoby chlazení. Mechanizace zemědělství, 2010, roč. 60, č. 8, s. 74 - 75. ISSN: 0373-6776.
Článek ve sborníku z akce
VESELÁ, K. – PEXA, M. – MAŘÍK, J. Analysis of particle abrasive wear of engine oil when using lasernet fines analyzer. In 5th International Conference on Trends in Agricultural Engineering 2013, TAE 2013 03.09.2013, Prague. Prague: Czech University of Life Sciences Prague, 2013. s. 637-641.
PEXA, M. – ČEDÍK, J. – PRAŽAN, ING. PH.D., R. ANALYSIS OF THE NRSC TEST DURING THE USE OF BIOFUELS FOR THE ZETOR FORTERRA TRACTOR. In 6TH INTERNATIONAL CONFERENCE ON TRENDS IN AGRICULTURAL ENGINEERING 2016 07.09.2016, Praha. Praha: CZECH UNIVERSITY LIFE SCIENCES PRAGUE, DEPT SYSTEMS ENG, KAMYCKA 129, PRAGUE 6 165 21, CZECH REPUBLIC, 2016. s. 478-483.
POŠTA, J. – PETERKA, B. APPROXIMATE TEST OF THE THERMAL DEGRADATION OF ENGINE OIL. In 6TH INTERNATIONAL CONFERENCE ON TRENDS IN AGRICULTURAL ENGINEERING 2016 07.09.2016, Praha. Praha: CZECH UNIVERSITY LIFE SCIENCES PRAGUE, DEPT SYSTEMS ENG, KAMYCKA 129, PRAGUE 6 165 21, CZECH REPUBLIC, 2016. s. 506-511.
PRIKNER, P. – ALEŠ, Z. ASSESSMENT OF SOIL COMPACTION RISK BY AGRICULTURAL TYRES. In 4th international Conference TAE 2010 Trends in Agricultural Engineering 2010 07.10.2010, Praha. Praha: Česká zemědělská univerzita Praha, 2010. s. 499-504.
PRAŽAN, ING. PH.D., R. – ČEDÍK, J. – GERNDTOVÁ, ING., I. – NEROLD, J. – PEXA, M. COMPARISON OF THREE SETS OF DRIVE TRACTOR TYRES WITH RESPECT TO TRACTION PROPERTIES. In 6TH INTERNATIONAL CONFERENCE ON TRENDS IN AGRICULTURAL ENGINEERING 2016 07.09.2016, Praha. Praha: CZECH UNIVERSITY LIFE SCIENCES PRAGUE, DEPT SYSTEMS ENG, KAMYCKA 129, PRAGUE 6 165 21, CZECH REPUBLIC, 2016. s. 516-521.
JURČA, V. – VÍTKOVÁ, V. – ALEŠ, Z. COMPUTERIZED MAINTENANCE MANAGEMENT SYSTEMS IN AGRICULTURE. In Trends in Agriculture Engineering 2010 07.09.2010, Prague. Prague: Czech University of Life Sciences Prague, Faculty of Engineering, 2010. s. 263-268.
SAILER, J. – HLADÍK, T. CONSISTENT MAINTENANCE MANAGEMENT MODEL. In PROCEEDING OF 7TH INTERNATIONAL CONFERENCE ON TRENDS IN AGRICULTURAL ENGINEERING 2019 17.09.2019, Prague. Praque: CZECH UNIVERSITY LIFE SCIENCES PRAGUE, DEPT SYSTEMS ENG, KAMYCKA 129, PRAGUE 6 165 21, CZECH REPUBLIC, 2019. s. 482-487.
MÜLLER, M. – VALÁŠEK, P. – PEXA, M. – HLADÍK, T. – ALEŠ, Z. – LEGÁT, V. Degradation process influencing safety of constructional adhesive bonds. In QR2MSE 2013 - Proceedings of 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering 15.07.2013, Emeishan, China. Sichuan, China: The maintenance Professional Committee of China Ordnance Industry Society, 2013. s. 784-788.
DEVICE FOR LONG-TERM DURABILITY TESTING OF TRANSMISSION OILS Ing. Peterka Bohuslav, Ph.D.; Ing. Peterka Bohuslav, Ph.D., 2010
VESELÁ, K. – PEXA, M. – MAŘÍK, J. – VALÁŠEK, P. Effect of biofuels on quality of engine oil. In 2nd International Conference on Materials, Transportation and Environmental Engineering, CMTEE 2014 30.07.2014, Kunming; China. Kunming; China: Trans Tech Publications Ltd, 2014. s. 414-417.
ALEŠ, Z. – JURČA, V. – LEGÁT, V. Effectiveness indicators of food processing lines. In 5th International Conference on Trends in Agricultural Engineering 2013, TAE 2013 03.09.2013, Prague. Prague: Czech University of Life Sciences Prague, 2013. s. 56-61.
PAVLŮ, J. – LEGÁT, V. – ALEŠ, Z. ESTIMATION TRENDS IN THE MAINTENANCE OF A MANUFACTURING EQUIPMENT RELATION TO THE INDUSTRY 4.0 CHALLENGE. In PROCEEDING OF 7TH INTERNATIONAL CONFERENCE ON TRENDS IN AGRICULTURAL ENGINEERING 2019 17.09.2019, Prague. Praque: CZECH UNIVERSITY LIFE SCIENCES PRAGUE, DEPT SYSTEMS ENG, KAMYCKA 129, PRAGUE 6 165 21, CZECH REPUBLIC, 2019. s. 435-440.
KUBÍN, K. – PEXA, M. EVALUATION OF TRANSPORT PROCESSES IN AGRICULTURE. In Trends in Agricultural Engineering 2010 07.09.2010, Praha 6 - Suchdol. Praha 6 - Suchdol: Czech University of Life Sciences Prague; Faculty of Engineering, 2010. s. 353-358.
EXPECTED TRENDS IN DEPENDABILITY MANAGEMENT WITHIN AGRICULTURAL ENGINEERING AND MANUFACTORING prof. Ing. Legát Václav, DrSc.; Ing. Aleš Zdeněk, Ph.D., 2010
POŠTA, J. External purification of hydraulic and machine oils. In Trends in Agricultural Engineering 2010 7.92010, Praha. Praha: CULS, Faculty of Engineering, 2010. s. 488 - 492.
PEXA, M. – MAŘÍK, J. – KUBÍN, K. Impact of biofuels on performance and emission characteristics combustion engine - Zetor 8641 forterra . In 5th International Conference on Trends in Agricultural Engineering 2013, TAE 2013 03.09.2013, Prague. Prague: Czech University of Life Sciences Prague, 2013. s. 523-528.
MAŘÍK, J. – PEXA, M. Impact of Rapeseed Oil on Characteristics of the Engine Tractor Zetor 8641 Forterra. In 6th International Scientific Conference on Rural Development - Innovations and Sustainability 28.11.2013, Akademija, LITHUANIA. LITHUANIA: ALEKSANDRAS STULGINSKIS UNIVERSITY, CENTRE RURAL SOCIAL RESEARCH, FAC ECONOMICS & MANAGEMENT, UNIVERSITETO STR 10-406, AKADEMIJA, KAUNAS DISTR 53361, LITHUANIA, 2013. s. 79-83.
ALEŠ, Z. – PAVLŮ, J. – PEXA, M. – SVOBODOVÁ, J. – KUČERA, M. – PETERKA, B. – POŠTA, J. INFLUENCE OF BIOBUTANOL ON WEAR OF FUEL INJECTION SYSTEM. In 6TH INTERNATIONAL CONFERENCE ON TRENDS IN AGRICULTURAL ENGINEERING 2016 07.09.2016, Praha. Praha: CZECH UNIVERSITY LIFE SCIENCES PRAGUE, DEPT SYSTEMS ENG, KAMYCKA 129, PRAGUE 6 165 21, CZECH REPUBLIC, 2016. s. 33-37.
HOLÚBEK, M. – ČEDÍK, J. – VU, H. – PEXA, M. INFLUENCE OF DIESEL - BUTANOL FUEL BLENDS ON PRODUCTION OF SOLID PARTICLES BY CI ENGINE. In PROCEEDING OF 7TH INTERNATIONAL CONFERENCE ON TRENDS IN AGRICULTURAL ENGINEERING 2019 17.09.2019, Prague. Praque: CZECH UNIVERSITY LIFE SCIENCES PRAGUE, DEPT SYSTEMS ENG, KAMYCKA 129, PRAGUE 6 165 21, CZECH REPUBLIC, 2019. s. 171-176.
MADER, D. – PEXA, M. – ČEDÍK, J. – PETERKA, B. – VONDRÁŠEK, Z. INFLUENCE OF OPERATING PARAMETERS OF THE VEHICLE ON THE ROLLING RESISTANCE SIZE WITH THE VARIABLE DIAMETER OF THE TEST ROLLER. In Proceeding of 7th International Conference on Trends in Agricultural Engineering 2019 17.09.2019, Prague. Prague: Czech University of Life Sciences Prague, Kamýcká 129, Prague, Czech Republic, 2019. s. 347-354.
PEXA, M. – PETERKA, B. – MAŘÍK, J. – ČEDÍK, J. – WEINFURTNER, L. Influencing the quality of hospital beds using vibro-acoustic diagnostic. In IMEKO PRAGUE 2015 XXI WORLD CONGRESS 30.08.2016, Prague Congress CentrePrague. Prague: IMEKO-International Measurement Federation Secretariat, 2015. s. 1162-1166.
VÍTKOVÁ, V. – JURČA, V. – TULACH, P. LEAN REVERSE LOGISTICS IN BEVERAGES. In Trends in Agriculture Engineering 2010 07.09.2010, Prague. Prague: Czech University of Life Sciences Prague, Faculty of Engineering, 2010. s. 627-632.
CINDR, M. – PEXA, M. – KUBÍN, K. MEASUREMENT OF AGRICULTURAL ENERGY DEVICE POWER PARAMETERS USING GPS. In Trends in Agricultural Engineering 2010 7.92010, Praha 6 - Suchdol. Praha 6 - Suchdol: Czech University of Life Sciences Prague; Faculty of Engineering, 2010. s. 676 - 679.
PETERKA, B. – PEXA, M. – ALEŠ, Z. – POŠTA, J. – ČEDÍK, J. Measurement of physical performance using dynamic methods . In IMEKO PRAGUE 2015 XXI WORLD CONGRESS 30.08.2015, Prague Congress CentrePrague. Prague: IMEKO-International Measurement Federation Secretariat, 2015. s. 171-174.
MIZERA, Č. – HERÁK, D. – HRABĚ, P. – ALEŠ, Z. – PAVLŮ, J. Mechanical behaviour of selected bulk oilseeds under compression loading. In IOP Conf. Series: Materials Science and Engineering 237 11.07.2017, Medan, Indonesia. Medan, Indonesia: Institute of Physics Publishing ( IOP ), 2017. s. 1-6.
PAVLŮ, J. – ALEŠ, Z. – JURČA, V. METHODS USED TO MEASURING FUEL CONSUMPTION DURING OPERATION OF TRACTORS BY TELEMATICS SYSTEMS. In 6TH INTERNATIONAL CONFERENCE ON TRENDS IN AGRICULTURAL ENGINEERING 2016 07.09.2016, Praha. Praha: CZECH UNIVERSITY LIFE SCIENCES PRAGUE, DEPT SYSTEMS ENG, KAMYCKA 129, PRAGUE 6 165 21, CZECH REPUBLIC, 2016. s. 466-471.
PEXA, M. – MAŘÍK, J. – ČEDÍK, J. – ALEŠ, Z. – VALÁŠEK, P. Mixture of oil and diesel as fuel for internal combustion engine. In 2nd International Conference on Materials, Transportation and Environmental Engineering, CMTEE 2014 30.07.2014, Kunming; China. China: Trans Tech Publications Ltd, 2014. s. 1197-1200.
PEXA, M. MOMENT OF INERTIA OF ENGINE. In Trends in Agricultural Engineering 2010 7.92010, Prague - . Prague: Czech University of Life Sciences Prague, 2010. s. 476 - 481.
ČEDÍK, J. – PEXA, M. – CHYBA, J. – PRAŽAN, ING. PH.D., R. PRESSURE CONDITIONS INSIDE THE WORKSPACE OF MULCHER WITH VERTICAL AXIS OF ROTATION. In 6TH INTERNATIONAL CONFERENCE ON TRENDS IN AGRICULTURAL ENGINEERING 2016 07.09.2016, Praha. Praha: CZECH UNIVERSITY LIFE SCIENCES PRAGUE, DEPT SYSTEMS ENG, KAMYCKA 129, PRAGUE 6 165 21, CZECH REPUBLIC, 2016. s. 129-134.
PEXA, M. – HLADÍK, T. – ALEŠ, Z. – LEGÁT, V. – MÜLLER, M. – VALÁŠEK, P. – HAVLŮ, V. Reliability and risk treatment centred maintenance . In QR2MSE 2013 - Proceedings of 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering 15.07.2013, China. China: The maintenance Professional Committee of China Ordnance Industry Society, 2013. s. 610-615.
ALEŠ, Z. – PAVLŮ, J. – **KUČERA, M. – LEGÁT, V. RELIABILITY CHARACTERISTICS OF MECHANICAL OBJECTS OF AGRICULTURAL MACHINES. In PROCEEDING OF 7TH INTERNATIONAL CONFERENCE ON TRENDS IN AGRICULTURAL ENGINEERING 2019 17.09.2019, Prague. Praque: CZECH UNIVERSITY LIFE SCIENCES PRAGUE, DEPT SYSTEMS ENG, KAMYCKA 129, PRAGUE 6 165 21, CZECH REPUBLIC, 2019. s. 26-31.
PETERKA, B. – NOVOTNÁ, Z. – JINDRA, P. – JINDRA, P. Statistical evaluation of data obtained by particle counter using non-reference fluids. In 5th International Conference on Trends in Agricultural Engineering 2013, TAE 2013 03.09.2013, Prague. Prague: Czech University of Life Sciences Prague, 2013. s. 518-522.
POŠTA, J. System vibration of roller bearings . In 5th International Conference on Trends in Agricultural Engineering 2013, TAE 2013 03.09.2013, Prague. Prague: University of Life Sciences Prague, 2013. s. 529-531.
ALEŠ, Z. TRIBOLOGICAL PROPERTIES OF TRANSMISSION OILS. In Trends in Agricultural Engineering 2010 7.92010, Praha. Praha: ČZU Praha, 2010. s. 53 - 58.
ALEŠ, Z. – PEXA, M. – PAVLŮ, J. Tribotechnical diagnostics of agricultural machines. In 11th International Scientific Conference on Engineering for Rural Development 24.05.2012, Jelgava; Latvia. Jelgava; Latvia: Latvia Academy of Agricultural and Forestry Sciences Division of Engineering, 2012. s. 88-92.
VONDŘIČKA, J. – ALEŠ, Z. – PEXA, M. – JURČA, V. USING OF INVESTMENT SIMULATIONS FOR PLANNING OF MAINTENANCE . In Trends in Agricultural Engineering 2010 7.92010, Praha. Praha: ČZU Praha, 2010. s. 643 - 647.
PAVLŮ, J. – ALEŠ, Z. – JURČA, V. Utilization of satellite monitoring for determination of optimal maintenance interval of agricultural machines. In 5th International Conference on Trends in Agricultural Engineering 2013, TAE 2013 03.09.2013, Prague. Prague: Czech University of Life Sciences Prague, 2013. s. 512-517.
PAVLŮ, J. – ALEŠ, Z. – JURČA, V. – PEXA, M. – VALÁŠEK, P. Utilization of satellite monitoring for maintenance decision making. In 2nd International Conference on Materials, Transportation and Environmental Engineering, CMTEE 2014 30.07.2014, Kunming; China. China: Trans Tech Publications Ltd, 2014. s. 1864-1867.
Výzkumná zpráva obsahující utajované informace
PEXA, M. – PEJŠA, L. Analýza emisí a jejich přepočet z homologačního na inspekční měření. Praha: Actia CZ, 2016, 5s. ISBN: ,
ALEŠ, Z. – MAŠEK, J. – LEGÁT, V. – MIMRA, M. – NOVÁK, P. – PAVLŮ, J. Aplikace metod optimalizace struktury strojního parku na vybraná střediska společnosti ČEPRO, a.s.. Praha: Technická fakulta ČZU, 2014, 87s. ISBN: ,
ALEŠ, Z. – MAŠEK, J. – LEGÁT, V. – MIMRA, M. – NOVÁK, P. – PAVLŮ, J. Návrh optimální strategie způsobu financování při pořizování nových vozidel pro společnost ČEPRO, a.s.. Praha: Technická fakulta ČZU, 2015, 38s. ISBN: ,
ALEŠ, Z. – MAŠEK, J. – LEGÁT, V. – MIMRA, M. – NOVÁK, P. – PAVLŮ, J. Optimalizace doby provozu do obnovy silničních vozidel na základě exploatační analýzy pro společnost ČEPRO, a.s.. Praha: Technická fakulta ČZU, 2014, 66s. ISBN: ,
ALEŠ, Z. – PEXA, M. – JURČA, V. – LEGÁT, V. – PAVLŮ, J. Optimalizace obnovy majetku. Praha: Technická fakulta ČZU, 2014, 86s. ISBN: ,
ALEŠ, Z. – MAŠEK, J. – LEGÁT, V. – MIMRA, M. – PAVLŮ, J. – NOVÁK, P. Optimalizace struktury motorových vozidel pro společnost MERO ČR, a.s.. Praha: Technická fakulta ČZU, 2015, 50s. ISBN: SL/0091/15,
ALEŠ, Z. – MAŠEK, J. – LEGÁT, V. – MIMRA, M. – NOVÁK, P. – PAVLŮ, J. Plán obnovy mobilních energetických prostředků používaných na skladech společnosti ČEPRO, a.s.. Praha: Technická fakulta ČZU, 2015, 65s. ISBN: 4500045045,
ČEDÍK, J. – PEXA, M. – MÜLLER, M. – ŠLEGER, V. V001 - Vývoj prototypu motoru na alkoholová paliva. Praha: Česká zemědělská univerzita v Praze, 2020, 66s. ISBN: ,
ČEDÍK, J. – PEXA, M. – MÜLLER, M. – ŠLEGER, V. V002 - Vývoj prototypu motoru na alkoholová paliva. Praha: Česká zemědělská univerzita v Praze, 2021, 46s. ISBN: ,
ČEDÍK, J. – PEXA, M. – MÜLLER, M. – ŠLEGER, V. V003 - Vývoj prototypu motoru na alkoholová paliva. Praha: Česká zemědělská univerzita v Praze, 2022, 91s. ISBN: ,
ALEŠ, Z. – JURČA, V. – LEGÁT, V. – PEXA, M. – PAVLŮ, J. Vědecko-technická rada – program údržby s využitím RCM. Praha: Technická fakulta ČZU, 2015, 64s. ISBN: 4170048451 ,
