×
Katedra zpracování dřeva a biomateriálů
banner

Publikace



Článek v odborném periodiku

ZEIDLER, A. – BORŮVKA, V. – SCHÖNFELDER, O. Comparison of Wood Quality of Douglas Fir and Spruce from Afforested Agricultural Land and Permanent Forest Land in the Czech Republic . FORESTS, 2018, roč. 9, č. 1, s. 1-12. ISSN: 1999-4907.

GAFF, M. – GAŠPARÍK, M. 3D Molding of Veneers by Mechanical and Pneumatic Methods. Materials, 2017, roč. 10, č. 3, s. 1-20. ISSN: 1996-1944.

GAFF, M. – GAŠPARÍK, M. – MATLÁK, J. 3D molding of veneers by mechanical means. BioResources, 2015, roč. 10, č. 1, s. 412-422. ISSN: 1930-2126.

GÁBORÍK, J. – GAFF, M. – RUMAN, D. – ZÁBORSKÝ, V. – KAŠIČKOVÁ, V. – SIKORA, A. Adhesive as a factor affecting the properties of laminated wood. BioResources, 2016, roč. 11, č. 4, s. 10565-10574. ISSN: 1930-2126.

HODOUŠEK, M. – BÖHM, M. – LEMASTER, R. – BUREŠ, M. – BERÁNKOVÁ, J. – CVACH, J. Air Permeation Rate of Oriented Strand Boards (OSB/3 and OSB/4). BioResources, 2015, roč. 10, č. 1, s. 1137-1148. ISSN: 1930-2126.

BOMBA, J. – BÖHM, M. – ŠEDIVKA, P. Analýza malých a středních pilařských podniků v ČR. Zprávy lesnického výzkumu, 2010, roč. 55, č. 3/2010, s. 221 - 232. ISSN: 0322-9688.

SVITÁK, M. – BARCÍK, Š. – RYSPLER, J. Application of carbon fibers on wood beams. Acta Facultatis Xylologiae, 2013, roč. 55, č. 2, s. 33-42. ISSN: 1336-3824.

HODOUŠEK, M. – BÖHM, M. – **SOUČKOVÁ, A. – **HERRERO, M. – OBERHOFNEROVÁ, E. APPLICATION OF PAINTS TO DECREASE AIR PERMEABILITY OF ORIENTED STRAND BOARDS. Maderas-Ciencia y Tecnologia, 2019, roč. 21, č. 1, s. 105-112. ISSN: 0717-3644.

PODLENA, M. – HÝSEK, Š. – PROCHÁZKA, J. Axial Loading of Different Single-pin Dowels and Effect on Withdrawal Strength . BioResources, 2018, roč. 13, č. 3, s. 5179-5192. ISSN: 1930-2126.

GAFF, M. – GAŠPARÍK, M. – BABIAK, M. – VOKATÝ, V. Bendability characteristics of wood lamellae in plastic region. COMPOSITE STRUCTURES, 2017, roč. 163, č. MAR, s. 410-422. ISSN: 0263-8223.

GAFF, M. – BABIAK, M. – VOKATÝ, V. – GAŠPARÍK, M. – RUMAN, D. Bending characteristics of hardwood lamellae in the elastic region. COMPOSITES PART B-ENGINEERING, 2017, roč. 116, č. MAY, s. 61-75. ISSN: 1359-8368.

SVOBODA, T. – RUMAN, D. – GAFF, M. – GAŠPARÍK, M. – MIFTIEVA, E. – DUNDEK, L. Bending characteristics of multilayered soft and hardwood materials. BioResources, 2015, roč. 10, č. 4, s. 8461-8473. ISSN: 1930-2126.

PAVELEK, M. – ADAMOVÁ, T. Bio-Waste Thermal Insulation Panel for Sustainable Building Construction in Steady and Unsteady-State Conditions. Materials, 2019, roč. 12, č. 12, s. 1-17. ISSN: 1996-1944.

GAŠPARÍK, M. – GAFF, M. Changes in Temperature and Moisture Content in Beech Wood Plasticized by Microwave Heating. BioResources, 2013, roč. 8, č. 3, s. 3372-3384. ISSN: 1930-2126.

**BUBENÍKOVÁ, T. – **LUPTÁKOVÁ, J. – **KAČÍKOVÁ, D. – KAČÍK, F. CHARACTERIZATION OF MACROMOLECULAR TRAITS OF LIGNIN FROM HEAT TREATED SPRUCE WOOD BY SIZE EXCLUSION CHROMATOGRAPHY. Acta Facultatis Xylologiae, 2018, roč. 60, č. 2, s. 33-42. ISSN: 1336-3824.

**HAZ, A. – **JABLONSKY, M. – **SURINA, I. – KAČÍK, F. – **BUBENIKOVA, T. – **DURKOVIC, J. Chemical Composition and Thermal Behavior of Kraft Lignins. FORESTS, 2019, roč. 10, č. 6, s. 1-12. ISSN: 1999-4907.

GAFF, M. – VOKATÝ, V. – BABIAK, M. – BAL, B. Coefficient of wood bendability as a function of selected factors. CONSTRUCTION AND BUILDING MATERIALS, 2016, roč. 2016, č. 126, s. 632-640. ISSN: 0950-0618.

GAŠPARÍK, M. – GAFF, M. – KAČÍK, F. – SIKORA, A. Color and Chemical Changes in Teak (Tectona grandis L. f.) and Meranti (Shorea spp.) Wood after Thermal Treatment. BioResources, 2019, roč. 14, č. 2, s. 2667-2683. ISSN: 1930-2126.

OBERHOFNEROVÁ, E. – PÁNEK, M. – PODLENA, M. – PAVELEK, M. – ŠTĚRBOVÁ, I. Color Stabilization of Siberian and European Larch Wood Using UVA, HALS, and Nanoparticle Pretreatments. FORESTS, 2019, roč. 10, č. 1, s. 1-12. ISSN: 1999-4907.

PÁNEK, M. – REINPRECHT, L. COLOUR STABILITY AND SURFACE DEFECTS OF NATURALLY AGED WOOD TREATED WITH TRANSPARENT PAINTS FOR EXTERIOR CONSTRUCTIONS. Wood Research, 2014, roč. 59, č. 3, s. 421-430. ISSN: 1336-4561.

PÁNEK, M. – OBERHOFNEROVÁ, E. – HÝSEK, Š. – ŠEDIVKA, P. – ZEIDLER, A. Colour Stabilization of Oak, Spruce, Larch and Douglas Fir Heartwood Treated with Mixtures of Nanoparticle Dispersions and UV-Stabilizers after Exposure to UV and VIS-Radiation. Materials, 2018, roč. 11, č. 9, s. 1-19. ISSN: 1996-1944.

**LUPTÁKOVÁ, J. – KAČÍK, F. – **EŠTOKOVÁ, A. – **KAČÍKOVÁ, D. – **ŠMÍRA, P. – **NASSWETTROVÁ, A. – **BUBENÍKOVÁ, T. COMPARISON OF ACTIVATION ENERGY OF THERMAL DEGRADATION OF HEAT STERILISED SILVER FIR WOOD TO LARVAL FRASS REGARDING FIRE SAFETY. Acta Facultatis Xylologiae, 2018, roč. 60, č. 1, s. 19-29. ISSN: 1336-3824.

OBERHOFNEROVÁ, E. – ŠIMŮNKOVÁ, K. – DVOŘÁK, O. – ŠTĚRBOVÁ, I. – **HIZIROGLU, S. – ŠEDIVKA, P. – PÁNEK, M. Comparison of Exterior Coatings Applied to Oak Wood as a Function of Natural and Artificial Weathering Exposure. Coatings, 2019, roč. 9, č. 12, s. 1-15. ISSN: 2079-6412.

HODOUŠEK, M. – **DIAS, A. – **MARTINS, C. – **MARQUES, A. – BÖHM, M. Comparison of Non-Destructive Methods Based on Natural Frequency for Determining the Modulus of Elasticity of Cupressus lusitanica and Populus x canadensis. BioResources, 2017, roč. 12, č. 1, s. 270-282. ISSN: 1930-2126.

ŠIMŮNKOVÁ, K. – PÁNEK, M. – ZEIDLER, A. Comparison of Selected Properties of Shellac Varnish for Restoration and Polyurethane Varnish for Reconstruction of Historical Artefacts. Coatings, 2018, roč. 8, č. 4, s. 1-12. ISSN: 2079-6412.

BORŮVKA, V. – ZEIDLER, A. – HOLEČEK, T. Comparison of Stiffness and Strength Properties of Untreated and Heat-Treated Wood of Douglas Fir and Alder. BioResources, 2015, roč. 10, č. 4, s. 8281-8294. ISSN: 1930-2126.

BOLDIŠ, M. – GAŠPARÍK, M. – GAFF, M. – RUMAN, D. Compression set of PU foam mattresses with self-clamping joints and sandwich structure. Wood Research, 2016, roč. 61, č. 6, s. 1003-1016. ISSN: 1336-4561.

BLAŽEK, J. – MÚČKA, M. – TRGALA, K. Cost and thermal - technical optimization of wooden constructon in the passive standard. Wood Research, 2016, roč. 61, č. 4, s. 663-672. ISSN: 1336-4561.

MRAČKOVÁ, E. – KRIŠŤÁK, Ľ. – KUČERKA, M. – GAFF, M. – GAJTANSKA, M. Creation of wood dust during wood processing: size analysis, dust separation, and occupational health. BioResources, 2016, roč. 11, č. 1, s. 209-222. ISSN: 1930-2126.

PÁNEK, M. – **REINPRECHT, L. Critical view on the possibility of color changes prediction in the surfaces of painted wood exposed outdoors using accelerated weathering in Xenotest. Journal of Coatings Technology and Research, 2019, roč. 16, č. 2, s. 339-352. ISSN: 1945-9645.

GAFF, M. – SARVAŠOVÁ KVIETKOVÁ, M. – GAŠPARÍK, M. – SLÁVIK, M. Dependence of roughness change and crack formation on parameters of wood surface embossing. Wood Research, 2016, roč. 61, č. 1, s. 163-174. ISSN: 1336-4561.

OBERHOFNEROVÁ, E. – ARNETOVÁ, K. – HOLEČEK, T. – BORŮVKA, V. – BOMBA, J. Determination of correlation between destructive and nondestructive test methods applied on modified wood exposed to natural weathering. BioResources, 2016, roč. 11, č. 2, s. 5155-5168. ISSN: 1930-2126.

ŠEDIVKA, P. – BOMBA, J. – BÖHM, M. – ZEIDLER, A. Determination of Strength Characteristics of Construction Timber Strengthened with Carbon and Glass Fibre Composite Using a Destructive Method. BioResources, 2015, roč. 10, č. 3, s. 4674-4685. ISSN: 1930-2126.

PODLENA, M. – BÖHM, M. – MÚČKA, M. – BOMBA, J. Determination of the Bending Moment of a Dowel and Tenon Joint on Window Profile IV 92 of a Wooden Window. BioResources, 2017, roč. 12, č. 2, s. 4202-4213. ISSN: 1930-2126.

BORŮVKA, V. – GAFF, M. – BABIAK, M. – MATÚŠ, M. Dimensional changes of veneer layered materials after cold pressing. BioResources, 2015, roč. 10, č. 4, s. 6663-6675. ISSN: 1930-2126.

PROCHÁZKA, J. – BÖHM, M. – SVITÁK, M. Diverse Influence of user-economic aspects to truss and rafter roof systems and their comparision. Wood Research, 2014, roč. 59, č. 3, s. 449-458. ISSN: 1336-4561.

ŠIMŮNKOVÁ, K. – OBERHOFNEROVÁ, E. – **REINPRECHT, L. – PÁNEK, M. – PODLENA, M. – ŠTĚRBOVÁ, I. Durability of Selected Transparent and Semi-Transparent Coatings on Siberian and European Larch during Artificial Weathering. Coatings, 2019, roč. 9, č. 1, s. 1-16. ISSN: 2079-6412.

PÁNEK, M. – HÝSEK, Š. – DVOŘÁK, O. – ZEIDLER, A. – OBERHOFNEROVÁ, E. – ŠIMŮNKOVÁ, K. – ŠEDIVKA, P. Durability of the Exterior Transparent Coatings on Nano-Photostabilized English Oak Wood and Possibility of Its Prediction before Artificial Accelerated Weathering. Nanomaterials, 2019, roč. 9, č. 11, s. 1-21. ISSN: 2079-4991.

OBERHOFNEROVÁ, E. – HÝSEK, Š. – PÁNEK, M. – BÖHM, M. Effect of artificial weathering and temperature cycling on the performance of coating systems used for wooden windows . Journal of Coatings Technology and Research, 2018, roč. 15, č. 4, s. 851-865. ISSN: 1945-9645.

HÝSEK, Š. – PODLENA, M. – BÖHM, M. – **BARTSCH, H. – **WENDERDEL, C. Effect of Cold Plasma Surface Pre-treatment of Wheat Straw Particles on Straw Board Properties. BioResources, 2018, roč. 13, č. 3, s. 5065-5079. ISSN: 1930-2126.

GAFF, M. – GAŠPARÍK, M. Effect of cyclic loading on modulus of elasticity of aspen wood. BioResources, 2015, roč. 10, č. 1, s. 290-298. ISSN: 1930-2126.

GAFF, M. – GÁBORÍK, J. Effect of cyclic loading on the elasticity of beech solid and laminated wood. BioResources, 2014, roč. 9, č. 3, s. 4288-4296. ISSN: 1930-2126.

HODOUŠEK, M. – BÖHM, M. – **SOUČKOVÁ, A. – HÝSEK, Š. Effect of Moisture Content on the Air Permeability of Oriented Strand Boards. BioResources, 2018, roč. 13, č. 3, s. 4856-4869. ISSN: 1930-2126.

KVIETKOVÁ, M. – GAFF, M. – GAŠPARÍK, M. – KMINIAK, R. – KRIŠ, A. Effect of number of saw blade teeth on noise level and wear of blade edges during cutting of wood. BioResources, 2015, roč. 10, č. 1, s. 1657-1666. ISSN: 1930-2126.

GAŠPARÍK, M. – BARCÍK, Š. Effect of plasticizing by microwave heating on bending characteristics of beech wood. BioResources, 2014, roč. 9, č. 3, s. 4808-4820. ISSN: 1930-2126.

ZÁBORSKÝ, V. – SIKORA, A. – GAFF, M. – KAŠIČKOVÁ, V. – BORŮVKA, V. Effect of Selected Factors on Stiffness of Dowel Joints . BioResources, 2018, roč. 13, č. 3, s. 5416-5431. ISSN: 1930-2126.

GAFF, M. – KVIETKOVÁ, M. – GAŠPARÍK, M. – KAPLAN, L. – BARCÍK, Š. Effect of selected parameters on the surface waviness in plane milling of thermally modified birch wood. BioResources, 2015, roč. 10, č. 4, s. 7618-7626. ISSN: 1930-2126.

OBERHOFNEROVÁ, E. – PÁNEK, M. – BÖHM, M. Effect of Surface Pretreatment with Natural Essential Oils on the Weathering Performance of Spruce Wood. BioResources, 2018, roč. 13, č. 3, s. 7053-7070. ISSN: 1930-2126.

BARCÍK, Š. – GAŠPARÍK, M. – RAZUMOV, E. Effect of temperature on the color changes of wood during thermal modification. CELLULOSE CHEMISTRY AND TECHNOLOGY, 2015, roč. 49, č. 9-10, s. 789-798. ISSN: 0576-9787.

BARCÍK, Š. – KVIETKOVÁ, M. – ALÁČ, P. Effect of the chosen parameters on deflection angle between cutting sides during the cutiing of aglomerated materials by water jet.. Wood Research, 2011, roč. 56, č. 4, s. 577-588. ISSN: 1336-4561.

KAPLAN, L. – SARVAŠOVÁ KVIETKOVÁ, M. – SEDLECKÝ, M. Effect of the Interaction between Thermal Modification Temperature and Cutting Parameters on the Quality of Oak Wood . BioResources, 2018, roč. 13, č. 1, s. 1251-1264. ISSN: 1930-2126.

PÁNEK, M. – REINPRECHT, L. Effect of the number of UV-protective coats on the color stability and surface defects of painted Bblack Locust and Norway Spruce woods subjected to natural weathering. BioResources, 2016, roč. 11, č. 2, s. 4663-4676. ISSN: 1930-2126.

DOUBEK, S. – BORŮVKA, V. – ZEIDLER, A. – **REINPRECHT, L. EFFECT OF THE PASSIVE CHEMICAL MODIFICATION OF WOOD WITH SILICON DIOXIDE (SILICA) ON ITS PROPERTIES AND INHIBITION OF MOULDS. Wood Research, 2018, roč. 63, č. 4, s. 599-616. ISSN: 1336-4561.

**KADLICOVA, P. – **OSVALDOVA, L. – **JANCIK, J. – GAFF, M. EFFECT OF THERMAL AND RETARDING TREATMENT ON FLAMMABILITY RATE OF TROPICAL TREE SPECIES. Wood Research, 2019, roč. 64, č. 1, s. 117-126. ISSN: 1336-4561.

**OSVALD, A. – GAFF, M. EFFECT OF THERMAL MODIFICATION ON FLAMELESS COMBUSTION OF SPRUCE WOOD. Wood Research, 2017, roč. 62, č. 4, s. 565-574. ISSN: 1336-4561.

BARCÍK, Š. – GAŠPARÍK, M. – RAZUMOV, E. Effect of thermal modification on the colour changes of oak wood. Wood Research, 2015, roč. 60, č. 3, s. 385-396. ISSN: 1336-4561.

**OSVALDOVA, L. – GAŠPARÍK, M. – **CASTELLANOS, J. – **MARKERT, F. – **KADLICOVA, P. – ČEKOVSKÁ, H. Effect of thermal treatment on selected fire safety features of tropical wood. Komunikacie, 2018, roč. 20, č. 2, s. 3-7. ISSN: 1335-4205.

KVIETKOVÁ, M. – GAŠPARÍK, M. – GAFF, M. Effect of thermal treatment on surface quality of beech wood after plane milling. BioResources, 2015, roč. 10, č. 3, s. 4226-4238. ISSN: 1930-2126.

**CABALOVA, I. – KAČÍK, F. – **LAGANA, R. – **VYBOHOVA, E. – **BUBENÍKOVÁ, T. – **CANOVA, I. – **DURKOVIC, J. Effect of Thermal Treatment on the Chemical, Physical, and Mechanical Properties of Pedunculate Oak (Quercus robur L.) Wood. BioResources, 2018, roč. 13, č. 1, s. 157-170. ISSN: 1930-2126.

BARCÍK, Š. – GAŠPARÍK, M. Effect of tool and milling parameters on the size distribution of splinters of planed native and thermally modified beech wood. BioResources, 2014, roč. 9, č. 1, s. 1346-1360. ISSN: 1930-2126.

PÁNEK, M. – REINPRECHT, L. Effect of vegetable oils on the colour stability of four tropical woods during natural and artificial weathering. JOURNAL OF WOOD SCIENCE, 2016, roč. 62, č. 1, s. 74-84. ISSN: 1435-0211.

HÝSEK, Š. – PODLENA, M. – **BARTSCH, H. – **WENDERDEL, C. – BÖHM, M. Effect of wheat husk surface pre-treatment on the properties of husk-based composite materials . INDUSTRIAL CROPS AND PRODUCTS, 2018, roč. 125, č. DEC2018, s. 105-113. ISSN: 0926-6690.

ZÁBORSKÝ, V. – BORŮVKA, V. – KAŠIČKOVÁ, V. – RUMAN, D. Effect of Wood Species, Adhesive Type, and Annual Ring Directions on the Stiffness of Rail to Leg Mortise and Tenon Furniture Joints. BioResources, 2017, roč. 12, č. 4, s. 7016-7031. ISSN: 1930-2126.

PÁNEK, M. – DVOŘÁK, O. – OBERHOFNEROVÁ, E. – ŠIMŮNKOVÁ, K. – ZEIDLER, A. Effectiveness of Two Different Hydrophobic Topcoats for Increasing of Durability of Exterior Coating Systems on Oak Wood. Coatings, 2019, roč. 9, č. 5, s. 1-13. ISSN: 2079-6412.

ZÁBORSKÝ, V. – BORŮVKA, V. – RUMAN, D. – GAFF, M. Effects of Geometric Parameters of Structural Elements on Joint Stiffness. BioResources, 2017, roč. 12, č. 1, s. 932-946. ISSN: 1930-2126.

MIFTIEVA, E. – GAFF, M. – SVOBODA, T. – BABIAK, M. – GAŠPARÍK, M. – RUMAN, D. – SUCHOPÁR, M. Effects of selected factors on bending characteristics of beech wood. BioResources, 2016, roč. 11, č. 1, s. 599-611. ISSN: 1930-2126.

ZÁBORSKÝ, V. – KAMBOJ, G. – SIKORA, A. – BORŮVKA, V. Effects of Selected Factors on Spruce Dowel Joint Stiffness. BioResources, 2019, roč. 14, č. 1, s. 1127-1140. ISSN: 1930-2126.

REINPRECHT, L. – PÁNEK, M. Effects of Wood Roughness, Light Pigments, and Water Repellent on the Color Stability of Painted Spruce Subjected to Natural and Accelerated Weathering. BioResources, 2015, roč. 10, č. 4, s. 7203-7219. ISSN: 1930-2126.

PÁNEK, M. – OBERHOFNEROVÁ, E. – ZEIDLER, A. – ŠEDIVKA, P. Efficacy of Hydrophobic Coatings in Protecting Oak Wood Surfaces during Accelerated Weathering. Coatings, 2017, roč. 7, č. 10, s. 1-15. ISSN: 2079-6412.

OČKAJOVÁ, A. – KUČERKA, M. – KRIŠŤÁK, L. – RUŽIAK, I. – GAFF, M. Efficiency of sanding belts for Beech and Oak sanding. BioResources, 2016, roč. 11, č. 2, s. 5242-5254. ISSN: 1930-2126.

TRGALA, K. – PAVELEK, M. – **WIMMER, R. Energy performance of five different building envelope structures using a modified Guarded Hot Box apparatus-Comparative analysis. ENERGY AND BUILDINGS, 2019, roč. 195, č. 2019, s. 116-125. ISSN: 0378-7788.

ŠEDIVKA, P. Estimation of Technical Efficiency in the production technologies for Czechs Sawmill Enterprises.. Drvna industrija, 2009, roč. 60, č. 4, s. 197 - 207. ISSN: 0012-6772.

KAPLAN, L. – SARVAŠOVÁ KVIETKOVÁ, M. – SIKORA, A. – SEDLECKÝ, M. EVALUATION OF THE EFFECT OF INDIVIDUAL PARAMATERS OF OAK WOOD MACHINING AND THEIR IMPACT ON THE VALUES OF WAVINESS MEASURED BY A LASER PROFILOMETER. Wood Research, 2018, roč. 63, č. 1, s. 127-140. ISSN: 1336-4561.

GAFF, M. – GÁBORÍK, J. Evaluation of wood surface quality after 3D molding of wood by pressing. BioResources, 2014, roč. 9, č. 3, s. 4468-4476. ISSN: 1930-2126.

GAFF, M. – GAŠPARÍK, M. – SARVAŠOVÁ KVIETKOVÁ, M. EVALUATION OF WOOD SURFACE QUALITY DEPENDING ON THE EMBOSSING PARAMETERS. Wood Research, 2017, roč. 62, č. 5, s. 751-762. ISSN: 1336-4561.

RUMAN, D. – GAFF, M. – GAŠPARÍK, M. – BABIAK, M. Experimental evaluation of joints using thin steel angles for wood structures. BioResources, 2016, roč. 11, č. 1, s. 33-43. ISSN: 1930-2126.

KMINIAK, R. – GAFF, M. Fabrication of structural joinery items of solid wood by the mean of abrasive water jet method. Wood Research, 2014, roč. 59, č. 3, s. 499-508. ISSN: 1336-4561.

KUBŠ, J. – GAFF, M. – BARCÍK, Š. Factors affecting the consumption of energy during the milling of thermally modified and unmodified beech wood. BioResources, 2016, roč. 11, č. 1, s. 736-747. ISSN: 1930-2126.

ČEKOVSKÁ, H. – GAFF, M. – **OSVALD, A. – KAČÍK, F. – KUBŠ, J. – KAPLAN, L. Fire resistance of thermally modified Spruce wood. BioResources, 2017, roč. 12, č. 1, s. 947-959. ISSN: 1930-2126.

GAŠPARÍK, M. – **MAKOVICKÁ OSVALDOVÁ, L. – ČEKOVSKÁ, H. – POTŮČEK, D. Flammability Characteristics of Thermally Modified Oak Wood Treated with a Fire Retardant. BioResources, 2017, roč. 12, č. 4, s. 8451-8467. ISSN: 1930-2126.

SALEM, M. – ZEIDLER, A. – BÖHM, M. – MOHAMED, M. – ALI, H. GC/MS Analysis of Oil Extractives from Wood and Bark of Pinus sylvestris, Abies alba, Picea abies, and Larix decidua. BioResources, 2015, roč. 10, č. 4, s. 7725-7737. ISSN: 1930-2126.

SVITÁK, M. – GAŠPARÍK, M. – PENC, J. Heat resistance of glued finger joints in spruce wood constructions. BioResources, 2014, roč. 9, č. 4, s. 7529-7541. ISSN: 1930-2126.

GAŠPARÍK, M. – GAFF, M. Identification of factors influencing the maximum flexure of beech wood plasticized by microwave heating. CELLULOSE CHEMISTRY AND TECHNOLOGY, 2013, roč. 47, č. 7-8, s. 573-581. ISSN: 0576-9787.

RUMAN, D. – ZÁBORSKÝ, V. – SVOBODA, T. – KAŠIČKOVÁ, V. – RODROVÁ, V. Identifying the Characteristics of Laminated Wood Based on the Values of Deflection Measured during its Bending. BioResources, 2017, roč. 12, č. 2, s. 2592-2608. ISSN: 1930-2126.

GAŠPARÍK, M. – GAFF, M. – ŠAFAŘÍKOVÁ, L. – VALLEJO, C. – SVOBODA, T. Impact bending strength and brinell hardness of densified hardwoods. BioResources, 2016, roč. 11, č. 4, s. 8638-8652. ISSN: 1930-2126.

GAFF, M. – RUMAN, D. – BORŮVKA, V. – ZÁBORSKÝ, V. Impact bending strength as a function of selected factors. BioResources, 2016, roč. 11, č. 4, s. 9880-9895. ISSN: 1930-2126.

GAFF, M. – RUMAN, D. – SVOBODA, T. – SIKORA, A. – ZÁBORSKÝ, V. – **VALLEJO, C. Impact Bending Strength as a Function of Selected Factors: 2 – Layered Materials from Densified Lamellas. BioResources, 2017, roč. 12, č. 4, s. 7311-7324. ISSN: 1930-2126.

KVIETKOVÁ, M. – BARCÍK, Š. – ALÁČ, P. Impact of angle geometry of tool on granulometric composition of particles during the flat milling of thermally modified beech. Wood Research, 2015, roč. 60, č. 1, s. 137-146. ISSN: 1336-4561.

KVIETKOVÁ, M. – BARCÍK, Š. – BOMBA, J. – ALÁČ, P. IMPACT OF CHOSEN PARAMETERS ON SURFACE UNDULATION DURING THE CUTTING OF AGGLOMERATED MATERIALS WITH AN ABRASIVE WATER JET. Drewno, 2014, roč. 57, č. 191, s. 111-123. ISSN: 1644-3985.

GAŠPARÍK, M. – BARCÍK, Š. Impact of Plasticization by Microwave Heating on the Total Deformation of Beech Wood. BioResources, 2013, roč. 8, č. 4, s. 6297-6308. ISSN: 1930-2126.

BORŮVKA, V. – ZEIDLER, A. – DOUBEK, S. Impact of silicon-based chemicals on selected physical and mechanical properties of wood. Wood Research, 2016, roč. 61, č. 4, s. 513-524. ISSN: 1336-4561.

**CABALOVA, I. – **ZACHAR, M. – KAČÍK, F. – TRIBULOVÁ, T. Impact of Thermal Loading on Selected Chemical and Morphological Properties of Spruce ThermoWood. BioResources, 2019, roč. 14, č. 1, s. 387-400. ISSN: 1930-2126.

GAŠPARÍK, M. – BARCÍK, Š. – BORŮVKA, V. – HOLEČEK, T. Impact of thermal modification of spruce wood on screw direct withdrawal load resistance. BioResources, 2015, roč. 10, č. 1, s. 1790-1802. ISSN: 1930-2126.

SIKORA, A. – KAČÍK, F. – GAFF, M. – VONDROVÁ, V. – **BUBENÍKOVÁ, T. – **KUBOVSKÝ, I. Impact of thermal modification on color and chemical changes of spruce and oak wood . JOURNAL OF WOOD SCIENCE, 2018, roč. 64, č. 4, s. 406-416. ISSN: 1435-0211.

GAFF, M. – KAČÍK, F. – GAŠPARÍK, M. Impact of thermal modification on the chemical changes and impact bending strength of European oak and Norway spruce wood. COMPOSITE STRUCTURES, 2019, roč. 216, č. 2019, s. 80-88. ISSN: 0263-8223.

**TRIBULOVÁ, T. – KAČÍK, F. – **EVTUGUIN, D. IMPACTS OF INORGANIC CHEMICALS USED FOR WOOD PROTECTION: A REVIEW. Acta Facultatis Xylologiae, 2017, roč. 59, č. 2, s. 5-22. ISSN: 1336-3824.

SEDLIAČIKOVÁ, M. – HAJDÚCHOVÁ, I. – KRIŠTOFÍK, P. – VISZLAI, I. – GAFF, M. Improving the performance of small and medium wood-processing enterprises . BioResources, 2016, roč. 11, č. 1, s. 439-450. ISSN: 1930-2126.

SALEM, M. – ELANSARY, H. – ELKELISH, A. – ZEIDLER, A. – HAYSSAM, A. – MERVAT, E. – YESSOUFOU, K. In vitro Bioactivity and Antimicrobial Activity of Picea abies and Larix decidua Wood and Bark Extracts. BioResources, 2016, roč. 11, č. 4, s. 9421-9437. ISSN: 1930-2126.

SAMUSEVICH, A. – ZEIDLER, A. – **VEJPUSTKOVÁ, M. INFLUENCE OF AIR POLLUTION AND EXTREME FROST ON WOOD CELL PARAMETERS AT MOUNTAIN SPRUCE STANDS (PICEA ABIES (L.) KARST.) IN THE ORE MOUNTAINS. Wood Research, 2017, roč. 62, č. 1, s. 79-90. ISSN: 1336-4561.

GAFF, M. – GAŠPARÍK, M. Influence of cyclic stress on the relaxation speed of native and laminated wood. BioResources, 2015, roč. 10, č. 1, s. 402-411. ISSN: 1930-2126.