×
Katedra zpracování dřeva a biomateriálů
banner

Publikace



Článek v odborném periodiku

ČEKOVSKÁ, H. – GAFF, M. – **OSVALD, A. – KAČÍK, F. – KUBŠ, J. – KAPLAN, L. Fire resistance of thermally modified Spruce wood. BioResources, 2017, roč. 12, č. 1, s. 947-959. ISSN: 1930-2126.

GAFF, M. – ČEKOVSKÁ, H. – BOUČEK, J. – **KACIKOVA, D. – **KUBOVSKY, I. – JURCZYKOVÁ, T. – **ZHANG, L. – MARINO, S. – **KAČÍK, F. Flammability Characteristics of Thermally Modified Meranti Wood Treated with Natural and Synthetic Fire Retardants. POLYMERS, 2021, roč. 13, č. 13, s. 1-13. ISSN: 2073-4360.

GAŠPARÍK, M. – **MAKOVICKÁ OSVALDOVÁ, L. – ČEKOVSKÁ, H. – POTŮČEK, D. Flammability Characteristics of Thermally Modified Oak Wood Treated with a Fire Retardant. BioResources, 2017, roč. 12, č. 4, s. 8451-8467. ISSN: 1930-2126.

SALEM, M. – ZEIDLER, A. – BÖHM, M. – MOHAMED, M. – ALI, H. GC/MS Analysis of Oil Extractives from Wood and Bark of Pinus sylvestris, Abies alba, Picea abies, and Larix decidua. BioResources, 2015, roč. 10, č. 4, s. 7725-7737. ISSN: 1930-2126.

BORŮVKA, V. – ŠEDIVKA, P. – NOVÁK, D. – HOLEČEK, T. Haptic and Aesthetic Properties of Heat-Treated Modified Birch Wood. FORESTS, 2021, roč. 12, č. 8, s. 1-20. ISSN: 1999-4907.

SVITÁK, M. – GAŠPARÍK, M. – PENC, J. Heat resistance of glued finger joints in spruce wood constructions. BioResources, 2014, roč. 9, č. 4, s. 7529-7541. ISSN: 1930-2126.

LÖWE, R. – SEDLECKÝ, M. – SIKORA, A. – PROKŮPKOVÁ, A. – MODLINGER, R. – NOVOTNÝ, K. – TURČÁNI, M. How Bark Beetle Attack Changes the Tensile and Compressive Strength of Spruce Wood (Picea abies (L.) H. Karst.). FORESTS, 2022, roč. 13, č. 1, s. 1-14. ISSN: 1999-4907.

GAŠPARÍK, M. – GAFF, M. Identification of factors influencing the maximum flexure of beech wood plasticized by microwave heating. CELLULOSE CHEMISTRY AND TECHNOLOGY, 2013, roč. 47, č. 7-8, s. 573-581. ISSN: 0576-9787.

GAŠPARÍK, M. – GAFF, M. – ŠAFAŘÍKOVÁ, L. – VALLEJO, C. – SVOBODA, T. Impact bending strength and brinell hardness of densified hardwoods. BioResources, 2016, roč. 11, č. 4, s. 8638-8652. ISSN: 1930-2126.

GAFF, M. – RUMAN, D. – BORŮVKA, V. – ZÁBORSKÝ, V. Impact bending strength as a function of selected factors. BioResources, 2016, roč. 11, č. 4, s. 9880-9895. ISSN: 1930-2126.

GAFF, M. – RUMAN, D. – SVOBODA, T. – SIKORA, A. – ZÁBORSKÝ, V. – **VALLEJO, C. Impact Bending Strength as a Function of Selected Factors: 2 – Layered Materials from Densified Lamellas. BioResources, 2017, roč. 12, č. 4, s. 7311-7324. ISSN: 1930-2126.

KVIETKOVÁ, M. – BARCÍK, Š. – ALÁČ, P. Impact of angle geometry of tool on granulometric composition of particles during the flat milling of thermally modified beech. Wood Research, 2015, roč. 60, č. 1, s. 137-146. ISSN: 1336-4561.

KVIETKOVÁ, M. – BARCÍK, Š. – BOMBA, J. – ALÁČ, P. IMPACT OF CHOSEN PARAMETERS ON SURFACE UNDULATION DURING THE CUTTING OF AGGLOMERATED MATERIALS WITH AN ABRASIVE WATER JET. Drewno, 2014, roč. 57, č. 191, s. 111-123. ISSN: 1644-3985.

**FRYDRYCH, M. – HÝSEK, Š. – **FRIDRICHOVA, L. – **LE VAN, S. – **HERCLIK, M. – **PECHOCIAKOVA, M. – **LE CHI, H. – **LOUDA, P. Impact of Flax and Basalt Fibre Reinforcement on Selected Properties of Geopolymer Composites. Sustainability, 2020, roč. 12, č. 1, s. 1-12. ISSN: 2071-1050.

GAŠPARÍK, M. – BARCÍK, Š. Impact of Plasticization by Microwave Heating on the Total Deformation of Beech Wood. BioResources, 2013, roč. 8, č. 4, s. 6297-6308. ISSN: 1930-2126.

SVOBODA, T. – SIKORA, A. – ZÁBORSKÝ, V. – GAFFOVÁ, Z. Impact of Selected Factors on the Bending Forces at the Proportionality Limit and Yield Point in Laminated Veneer Lumber. BioResources, 2019, roč. 14, č. 2, s. 2491-2512. ISSN: 1930-2126.

BORŮVKA, V. – ZEIDLER, A. – DOUBEK, S. Impact of silicon-based chemicals on selected physical and mechanical properties of wood. Wood Research, 2016, roč. 61, č. 4, s. 513-524. ISSN: 1336-4561.

**CABALOVA, I. – **ZACHAR, M. – KAČÍK, F. – TRIBULOVÁ, T. Impact of Thermal Loading on Selected Chemical and Morphological Properties of Spruce ThermoWood. BioResources, 2019, roč. 14, č. 1, s. 387-400. ISSN: 1930-2126.

GAŠPARÍK, M. – BARCÍK, Š. – BORŮVKA, V. – HOLEČEK, T. Impact of thermal modification of spruce wood on screw direct withdrawal load resistance. BioResources, 2015, roč. 10, č. 1, s. 1790-1802. ISSN: 1930-2126.

SIKORA, A. – KAČÍK, F. – GAFF, M. – VONDROVÁ, V. – **BUBENÍKOVÁ, T. – **KUBOVSKÝ, I. Impact of thermal modification on color and chemical changes of spruce and oak wood . JOURNAL OF WOOD SCIENCE, 2018, roč. 64, č. 4, s. 406-416. ISSN: 1435-0211.

GAFF, M. – KAČÍK, F. – GAŠPARÍK, M. Impact of thermal modification on the chemical changes and impact bending strength of European oak and Norway spruce wood. COMPOSITE STRUCTURES, 2019, roč. 216, č. 2019, s. 80-88. ISSN: 0263-8223.

**TRIBULOVÁ, T. – KAČÍK, F. – **EVTUGUIN, D. IMPACTS OF INORGANIC CHEMICALS USED FOR WOOD PROTECTION: A REVIEW. Acta Facultatis Xylologiae, 2017, roč. 59, č. 2, s. 5-22. ISSN: 1336-3824.

SEDLIAČIKOVÁ, M. – HAJDÚCHOVÁ, I. – KRIŠTOFÍK, P. – VISZLAI, I. – GAFF, M. Improving the performance of small and medium wood-processing enterprises . BioResources, 2016, roč. 11, č. 1, s. 439-450. ISSN: 1930-2126.

SALEM, M. – ELANSARY, H. – ELKELISH, A. – ZEIDLER, A. – HAYSSAM, A. – MERVAT, E. – YESSOUFOU, K. In vitro Bioactivity and Antimicrobial Activity of Picea abies and Larix decidua Wood and Bark Extracts. BioResources, 2016, roč. 11, č. 4, s. 9421-9437. ISSN: 1930-2126.

SAMUSEVICH, A. – ZEIDLER, A. – **VEJPUSTKOVÁ, M. INFLUENCE OF AIR POLLUTION AND EXTREME FROST ON WOOD CELL PARAMETERS AT MOUNTAIN SPRUCE STANDS (PICEA ABIES (L.) KARST.) IN THE ORE MOUNTAINS. Wood Research, 2017, roč. 62, č. 1, s. 79-90. ISSN: 1336-4561.

GAFF, M. – GAŠPARÍK, M. Influence of cyclic stress on the relaxation speed of native and laminated wood. BioResources, 2015, roč. 10, č. 1, s. 402-411. ISSN: 1930-2126.

GAŠPARÍK, M. – GAFF, M. Influence of densification on bending strength of beech wood. Wood Research, 2015, roč. 60, č. 2, s. 211-218. ISSN: 1336-4561.

GAFF, M. – GAŠPARÍK, M. Influence of densification on bending strength of laminated beech wood. BioResources, 2015, roč. 10, č. 1, s. 1506-1518. ISSN: 1930-2126.

ŠTĚRBOVÁ, I. – OBERHOFNEROVÁ, E. – PÁNEK, M. – DVOŘÁK, O. – PAVELEK, M. Influence of different exposition of larch wood facade models on their surface degradation processes. Central European Forestry Journal, 2021, roč. 67, č. 1, s. 45-53. ISSN: 2454-034X.

BOMBA, J. – ŠEDIVKA, P. – HÝSEK, Š. – OBERHOFNEROVÁ, E. Influence of Glue Line Thickness on the Strength of Joints Bonded with PVAc Adhesives. Forest Products Journal, 2018, roč. 68, č. 2, s. 120-126. ISSN: 0015-7473.

HÝSEK, Š. – ČERMÁK, J. – LEXA, M. Influence of Lignocellulosic Waste Pre-Treatment on the Characteristics of Bond Rupture. Sustainability, 2019, roč. 11, č. 17, s. 1-16. ISSN: 2071-1050.

BOMBA, J. – ŠEDIVKA, P. – BÖHM, M. – DEVERA, M. Influence of Moisture Content on the Bond Strength and Water Resistance of Bonded Wood Joints. BioResources, 2014, roč. 9, č. 3, s. 5208-5218. ISSN: 1930-2126.

JAMBEROVÁ, Z. – VANČO, M. – BARCÍK, Š. – GAFF, M. – ČEKOVSKÁ, H. – KUBŠ, J. – KAPLAN, L. Influence of processing factors and species of wood on granulometric composition of juvenile poplar wood chips. BioResources, 2016, roč. 11, č. 4, s. 9572-9583. ISSN: 1930-2126.

BOMBA, J. – BÖHM, M. – ŠEDIVKA, P. – FRIESS, F. – ORÁLKOVÁ, R. Influence of selected factors on the sawing capacity of sawmills in the Czech Republic. Scientia Agriculturae Bohemica, 2016, roč. 47, č. 4, s. 174-180. ISSN: 1211-3174.

ZEIDLER, A. – ŠEDIVKA, P. INFLUENCE OF SELECTED FACTORS ON WOOD DENSITY VARIABILITY IN GRAND FIR (ABIES GRANDIS /DOUGLAS/ LINDL.). Wood Research, 2015, roč. 60, č. 1, s. 33-44. ISSN: 1336-4561.

BORŮVKA, V. – DUDÍK, R. – ZEIDLER, A. – HOLEČEK, T. Influence of Site Conditions and Quality of Birch Wood on Its Properties and Utilization after Heat Treatment. Part IElastic and Strength Properties, Relationship to Water and Dimensional Stability. FORESTS, 2019, roč. 10, č. 2, s. 1-22. ISSN: 1999-4907.

DUDÍK, R. – BORŮVKA, V. – ZEIDLER, A. – HOLEČEK, T. – RIEDL, M. Influence of Site Conditions and Quality of Birch Wood on Its Properties and Utilization after Heat Treatment.Part II-Surface Properties and Marketing Evaluation of the Effect of the Treatment on Final Usage of Such Wood. FORESTS, 2020, roč. 11, č. 5, s. 1-28. ISSN: 1999-4907.

MÚČKA, M. – ŠEDIVKA, P. – BOMBA, J. – BLAŽEK, J. Influence of spacer frames for wooden roof windows on the formation of surface condensation. BioResources, 2016, roč. 11, č. 3, s. 6174-6184. ISSN: 1930-2126.

BARCÍK, Š. – KVIETKOVÁ, M. – GAŠPARÍK, M. – KMINIAK, R. Influence of technological parameters on lagging size in cutting process of solid wood by abrasive water jet. Wood Research, 2013, roč. 58, č. 4, s. 627-635. ISSN: 1336-4561.

**LUPTAKOVA, J. – KAČÍK, F. – **MITTEROVA, I. – **ZACHAR, M. Influence of Temperature of Thermal Modification on the Fire-technical Characteristics of Spruce Wood. BioResources, 2019, roč. 14, č. 2, s. 3795-3807. ISSN: 1930-2126.

ŠEDIVKA, P. – BOMBA, J. – BÖHM, M. – BOŠKA, P. Influence of Temperature on the Strength of Bonded Joints . BioResources, 2015, roč. 10, č. 3, s. 3999-4010. ISSN: 1930-2126.

BARCÍK, Š. – GAŠPARÍK, M. – HOREJŠ, P. Influence of thermal modification on nail withdrawal strength of spruce wood. BioResources, 2014, roč. 9, č. 4, s. 5963-5975. ISSN: 1930-2126.

KUBŠ, J. – GAŠPARÍK, M. – GAFF, M. – KAPLAN, L. – ČEKOVSKÁ, H. – JEŽEK, J. – ŠTÍCHA, V. Influence of Thermal Treatment on Power Consumption during Plain Milling of Lodgepole Pine (Pinus contorta subsp murrayana). BioResources, 2017, roč. 12, č. 1, s. 407-418. ISSN: 1930-2126.

HÝSEK, Š. – ŠEDIVKA, P. – BÖHM, M. – SCHÖNFELDER, O. – **BERAN, R. Influence of Using Recycled Polyurethane Particles as a Filler on Properties of Polyurethane Adhesives for Gluing of Wood . BioResources, 2018, roč. 13, č. 2, s. 2592-2601. ISSN: 1930-2126.

DITOMMASO, G. – GAFF, M. – KAČÍK, F. – SIKORA, A. – SETHY, A. – CORLETO, R. – REZAEI, F. – KAPLAN, L. – KUBŠ, J. – DAS, S. – KAMBOJ, G. – GAŠPARÍK, M. – ŠEDIVKA, P. – HÝSEK, Š. – MACKŮ, J. – SEDLECKÝ, M. Interaction of technical and technological factors on qualitative and energy/ecological/economic indicators in the production and processing of thermally modified merbau wood. JOURNAL OF CLEANER PRODUCTION, 2020, roč. 252, č. 2020, s. 1-12. ISSN: 0959-6526.

GAFF, M. – REZAEI, F. – SIKORA, A. – HÝSEK, Š. – SEDLECKÝ, M. – DITOMMASO, G. – CORLETO, R. – KAMBOJ, G. – SETHY, A. – VALIŠ, M. – ŘÍPA, K. Interactions of monitored factors upon tensile glue shear strength on laser cut wood. COMPOSITE STRUCTURES, 2020, roč. 234, č. 2020, s. 1-10. ISSN: 0263-8223.

**VEJPUSTKOVÁ, M. – ČIHÁK, T. – SAMUSEVICH, A. – ZEIDLER, A. – **NOVOTNÝ, R. – **ŠRÁMEK, V. Interactive effect of extreme climatic event and pollution load on growth and wood anatomy of spruce. TREES-STRUCTURE AND FUNCTION, 2017, roč. 31, č. 2, s. 575-586. ISSN: 0931-1890.

PÁNEK, M. – OBERHOFNEROVÁ, E. – DVOŘÁK, O. – ŠEDIVKA, P. – ZEIDLER, A. – **KALOČ, J. Jakým nátěrem ošetřit dřevo dubu v exteriéru. TZB-info, 2019, roč. , č. 1, s. 1-8. ISSN: 1801-4399.

SVOBODA, T. – SIKORA, A. – ZÁBORSKÝ, V. – GAFFOVÁ, Z. Laminated Veneer Lumber with Non-Wood Components and the Effects of Selected Factors on Its Bendability. FORESTS, 2019, roč. 10, č. 6, s. 1-17. ISSN: 1999-4907.

ŠIMŮNKOVÁ, K. – HÝSEK, Š. – **REINPRECHT, L. – ŠOBOTNÍK, J. – LIŠKOVÁ, T. – PÁNEK, M. Lavender oil as eco-friendly alternative to protect wood against termites without negative effect on wood properties. Scientific Reports, 2022, roč. 12, č. 1, s. 1-11. ISSN: 2045-2322.

HOLEČEK, T. – GAŠPARÍK, M. – **LAGAŇA, R. – BORŮVKA, V. – OBERHOFNEROVÁ, E. Measuring the modulus of elasticity of thermally treated spruce wood using the ultrasound and resonance methods. BioResources, 2017, roč. 12, č. 1, s. 819-838. ISSN: 1930-2126.

ZEIDLER, A. – SALEM, M. – BORŮVKA, V. Mechanical Properties of Grand Fir Wood Grown in the Czech Republic in Vertical and Horizontal Positions.. BioResources, 2015, roč. 10, č. 1, s. 793-808. ISSN: 1930-2126.

SEDLECKÝ, M. – SARVAŠOVÁ KVIETKOVÁ, M. – KMINIAK, R. Medium-density Fiberboard (MDF) and Edge-glued Panels (EGP) after Edge Milling - Surface Roughness after Machining with Different Parameters . BioResources, 2018, roč. 13, č. 1, s. 2005-2021. ISSN: 1930-2126.

SEDLECKÝ, M. – SARVAŠOVÁ KVIETKOVÁ, M. – KMINIAK, R. – KAPLAN, L. MEDIUM-DENSITY FIBERBOARD AND EDGE-GLUED PANEL AFTER EDGE MILLING - SURFACE WAVINESS AFTER MACHINING WITH DIFFERENT PARAMETERS MEASURED BY CONTACT AND CONTACTLESS METHOD. Wood Research, 2018, roč. 63, č. 4, s. 683-697. ISSN: 1336-4561.

HÝSEK, Š. – **VEVERKA, J. Měření tloušťky nátěru na diamagnetickém materiálu ultrazvukovou metodou. TZB-info, 2020, roč. , č. , s. 0-0. ISSN: 1801-4399.

GAFF, M. – BABIAK, M. Methods for determining the plastic work in bending and impact of selected factors on its value . COMPOSITE STRUCTURES, 2018, roč. 202, č. SI, s. 66-76. ISSN: 0263-8223.

SALEM, M. – NASSER, R. – ZEIDLER, A. – ELANSARY, H. – AREF, I. – BÖHM, M. – ALI, H. – AHMED, A. Methylated Fatty Acids from Heartwood and Bark of Pinus sylvestris, Abies alba, Picea abies, and Larix decidua: Effect of Strong Acid Treatment. BioResources, 2015, roč. 10, č. 4, s. 7715-7724. ISSN: 1930-2126.

GAFF, M. – MATLÁK, J. Modification of veneers by lamination and steaming for the purpose of increasing 3D moldability. BioResources, 2014, roč. 9, č. 4, s. 7141-7151. ISSN: 1930-2126.

BABIAK, M. – GAFF, M. – SIKORA, A. – HÝSEK, Š. Modulus of elasticity in three- and four-point bending of wood . COMPOSITE STRUCTURES, 2018, roč. 204, č. NOV2018, s. 454-465. ISSN: 0263-8223.

HÝSEK, Š. – GAFF, M. – SIKORA, A. – BABIAK, M. New composite material based on winter rapeseed and his elasticity properties as a function of selected factors . COMPOSITES PART B-ENGINEERING, 2018, roč. 153, č. NOV2018, s. 108-116. ISSN: 1359-8368.

GAFF, M. – HÝSEK, Š. – SIKORA, A. – BABIAK, M. Newly Developed Boards Made from Crushed Rapeseed Stalk and their Bendability Properties. BioResources, 2018, roč. 13, č. 3, s. 4776-4794. ISSN: 1930-2126.

HÁJKOVÁ, K. – BOUČEK, J. – PROCHÁZKA, P. – **KALOUS, P. – **BUDSKÝ, D. Nitrate-Alkaline Pulp from Non-Wood Plants. Materials, 2021, roč. 14, č. 13, s. 1-11. ISSN: 1996-1944.

SALEM, M. – ZEIDLER, A. – BÖHM, M. – SRBA, J. Norway Spruce (Picea abies [L.] Karst.) as a Bioresource: Evaluation of Solid Wood, Particleboard, and MDF Technological Properties and Formaldehyde Emission. BioResources, 2013, roč. 8, č. 1, s. 1199-1221. ISSN: 1930-2126.

HÝSEK, Š. – ZACHOVÁ, R. Novel Lignin-Beeswax adhesive for production of composites from beech and spruce particles. JOURNAL OF CLEANER PRODUCTION, 2022, roč. 362, č. 2022, s. 1-12. ISSN: 0959-6526.

KAMBOJ, G. – GAFF, M. – **SMARDZEWSKI, J. – **HAVIAROV, E. – SETHY, A. – BORŮVKA, V. Numerical and experimental investigation on the elastic stiffness of glued dovetail joints. CONSTRUCTION AND BUILDING MATERIALS, 2020, roč. 263, č. 2020, s. 1-12. ISSN: 0950-0618.

HÝSEK, Š. – WIMMER, R. – BÖHM, M. Optimal processing of flax and hemp fibre nonwovens. BioResources, 2016, roč. 11, č. 4, s. 8522-8534. ISSN: 1930-2126.

KVIETKOVÁ, M. – BARCÍK, Š. – GAŠPARÍK, M. Optimization of the cutting process of wood-based agglomerated materials by abrasive water-jet. Acta Silvatica et Lignaria Hungarica, 2014, roč. 10, č. 1, s. 31-47. ISSN: 1786-691X.

ZACHOVÁ, R. – MITTERPACH, J. – ŠEDIVKA, P. – PÁNEK, M. Outdoor efficacy of additional hydrophobic treatment of weathered wood by siloxane. CONSTRUCTION AND BUILDING MATERIALS, 2022, roč. 360, č. 2022, s. 1-11. ISSN: 0950-0618.

HÝSEK, Š. – SIKORA, A. – SCHÖNFELDER, O. – BÖHM, M. Physical and Mechanical Properties of Boards Made from Modified Rapeseed Straw Particles. BioResources, 2018, roč. 13, č. 3, s. 6396-6408. ISSN: 1930-2126.

GAFF, M. – BABIAK, M. – KAČÍK, F. – SANDBERG, D. – TURČÁNI, M. – HANZLÍK, P. – VONDROVÁ, V. Plasticity properties of thermally modified timber in bending - The effect of chemical changes during modification of European oak and Norway spruce. COMPOSITES PART B-ENGINEERING, 2019, roč. 165, č. 2019, s. 613-625. ISSN: 1359-8368.

BOMBA, J. – JEŽEK, J. – HÝSEK, Š. – SIKORA, A. – STOLARIKOVÁ, R. – PALACKÁ, A. – BERKOVÁ, M. – KOLBABOVÁ, T. Polyurethane Coatings on Hardwood and Softwood Surfaces: Their Resistance to Household Liquids as an Educational Case Study. BioResources, 2017, roč. 12, č. 3, s. 5867-5877. ISSN: 1930-2126.

SEDLECKÝ, M. – GAŠPARÍK, M. Power Consumption during Edge Milling of Medium-Density Fiberboard and Edge-Glued Panel. BioResources, 2017, roč. 12, č. 4, s. 7413-7426. ISSN: 1930-2126.

**CHEN, C. – **LI, H. – **DAULETBEK, A. – **SHEN, F. – **HUI, D. – GAFF, M. – **LORENZO, R. – **CORBI, I. – **CORBI, O. – **ASHRAF, M. Properties and Applications of Bamboo Fiber-A Current-State-of-the Art. ..., 2022, roč. 10, č. 3, s. 605-624. ISSN: N.

CAFOUREK, J. – GAFF, M. – GAŠPARÍK, M. – SLÁVIK, M. – MACKŮ, J. Properties and use of biomass from reclaimed land in the north Bohemian basin. Wood Research, 2016, roč. 61, č. 5, s. 777-790. ISSN: 1336-4561.

SIKORA, A. – **GAFF, M. – **NEMETH, R. Properties of wood-based composites manufactured from densified beech wood in viscoelastic and plastic region of the force-deflection diagram (FDD). REVIEWS ON ADVANCED MATERIALS SCIENCE, 2021, roč. 60, č. 1, s. 1-17. ISSN: 1606-5131.

**GÁBORÍK, J. – GAFF, M. – RUMAN, D. – GAŠPARÍK, M. – SVOBODA, T. – VOKATÝ, V. – SIKORA, A. Quality of the Surface of Aspen Wood after Pressing. BioResources, 2017, roč. 12, č. 1, s. 82-94. ISSN: 1930-2126.

KMINIAK, R. – GAFF, M. Roughness of surface created by transversal sawing of spruce, beech, and oak wood . BioResources, 2015, roč. 10, č. 2, s. 2873-2887. ISSN: 1930-2126.

ZEIDLER, A.; idPublikace = 61328; Název: SESYCHÁNÍ DŘEVA LÍSKY TURECKÉ (CORYLUS COLURNA L.) A JEHO VARIABILITA V KMENI-- Neexistuje podtyp publikace --

GAŠPARÍK, M. – GAFF, M. – RUMAN, D. – ZÁBORSKÝ, V. – KAŠIČKOVÁ, V. – SIKORA, A. – ŠTÍCHA, V. Shear Bond Strength of Two-Layered Hardwood Strips Bonded with Polyvinyl Acetate and Polyurethane Adhesives. BioResources, 2017, roč. 12, č. 1, s. 495-513. ISSN: 1930-2126.

GAFF, M. – GAŠPARÍK, M. Shrinkage and Stability of Thermo-Mechanically Modified Aspen Wood. BioResources, 2013, roč. 8, č. 1, s. 1136-1146. ISSN: 1930-2126.

LUKÁŠEK, J. – ZEIDLER, A. – BARCÍK, Š. Shrinkage of Grand Fir Wood and its Variability within the Stem. Drvna industrija, 2012, roč. 63, č. 2, s. 121-128. ISSN: 0012-6772.

GAFF, M. – GAŠPARÍK, M. – BORŮVKA, V. – BABIAK, M. Simulating stresses associated with the bending of wood using a finite element method. BioResources, 2015, roč. 10, č. 2, s. 2009-2019. ISSN: 1930-2126.

SALEM, M. – BÖHM, M. – ŠEDIVKA, P. – **NASSER, R. – **HAYSSAM, A. – **ELGAT, A. Some Physico-mechanical Characteristics of Uncoated OSB ECO-products Made from Scots Pine (Pinus sylvestris L.) and Bonded with pMDI Resin. BioResources, 2018, roč. 13, č. 1, s. 1814-1828. ISSN: 1930-2126.

PAVELEK, M. – PRAJER, M. – TRGALA, K. Static and Dynamic Thermal Characterization of Timber Frame/Wheat (Triticum Aestivum) Chaff Thermal Insulation Panel for Sustainable Building Construction . Sustainability, 2018, roč. 10, č. 7, s. 1-19. ISSN: 2071-1050.

PODLENA, M. – BORŮVKA, V. Stiffness coefficients of mortise and tenon joints used on wooden window profiles. ..., 2016, roč. 11, č. 2, s. 4677-4687. ISSN: N.

LEXA, M. – **VEJPUSTKOVÁ, M. – SAMUSEVICH, A. – ZEIDLER, A. Stopa imisní kalamity v anatomických znacích dřeva smrku (Picea Abies (L.) Karst.) v oblasti Klínovce (Krušné Hory). Zprávy lesnického výzkumu, 2018, roč. 63, č. 2, s. 136-146. ISSN: 0322-9688.

IHNÁT, V. – BORŮVKA, V. – BABIAK, M. – LÜBKE, H. – SCHWARTZ, J. Straw pulp as a secondary lignocellulosic raw material and its impact on properties of insulating fiberboards. Part III. Preparation of insulating fiberboards from separately milled lignocellulosic raw materials.. Wood Research, 2015, roč. 60, č. 3, s. 441-450. ISSN: 1336-4561.

LÜBKE, H. – IHNÁT, V. – BORŮVKA, V. Straw pulp as a secondary lingocellulosic raw material and its impact on properties of insulating fiberboards. Part I. Characteristic of straw fibre from the perspective of the mass creation.. Wood Research, 2014, roč. 59, č. 5, s. 747-756. ISSN: 1336-4561.

IHNÁT, V. – LÜBKE, H. – BORŮVKA, V. – BABIAK, M. – SCHWARTZ, J. Straw pulp as a secondary lingocellulosic raw material and its impact on properties of insulating fiberboards. Part II. Preparation of insulated fiberboards with straw fiber content.. Wood Research, 2015, roč. 60, č. 2, s. 235-246. ISSN: 1336-4561.

BÖHM, M. – ŠEDIVKA, P. – BOMBA, J. – REISNER, J. Strength characteristics of OSB in bending – Difference between upper and lower panel faces. Drvna industrija, 2011, roč. 62, č. 2, s. 123-127. ISSN: 0012-6772.

BOMBA, J. – CVACH, J. – ŠEDIVKA, P. – KVIETKOVÁ, M. Strength Increase Pattern in Joints Bonded with PVAc Adhesives . BioResources, 2014, roč. 9, č. 1, s. 1027-1037. ISSN: 1930-2126.

GAFF, M. – GAŠPARÍK, M. – BORŮVKA, V. – HAVIAROVÁ, E. Stress simulation in layered wood-based materials under mechanical loading. MATERIALS & DESIGN, 2015, roč. 2015, č. 87, s. 1065-1071. ISSN: 0261-3069.

**KLEMENT, I. – **VILKOVSKA, T. – **VILKOVSKY, P. – HÝSEK, Š. Structural Differences between Reaction Wood and Opposite Wood with Different Drying Temperatures. BioResources, 2020, roč. 15, č. 2, s. 4407-4416. ISSN: 1930-2126.

RAZUMOV, E. – SAFIN, R. – BARCÍK, Š. – KVIETKOVÁ, M. – ROMELEVICH, K. Studies on mechanical properties of composite materials based on thermo modified timber. Drvna industrija, 2013, roč. 64, č. 1, s. 3-8. ISSN: 0012-6772.

**KUBOVSKÝ, I. – OBERHOFNEROVÁ, E. – KAČÍK, F. – PÁNEK, M. Surface Changes of Selected Hardwoods Due to Weather Conditions. FORESTS, 2018, roč. 9, č. 9, s. 1-15. ISSN: 1999-4907.

SARVAŠOVÁ KVIETKOVÁ, M. – GAŠPARÍK, M. SURFACE IRREGULARITIES OF OAK WOOD AFTER TRANSVERSAL CUTTING WITH A CIRCULAR SAW. Wood Research, 2021, roč. 66, č. 6, s. 1032-1045. ISSN: 1336-4561.

KAMBOJ, G. – GAŠPARÍK, M. – GAFF, M. – KAČÍK, F. – SETHY, A. – CORLETO, R. – REZAEI, F. – DITOMMASO, G. – SIKORA, A. – KAPLAN, L. – KUBŠ, J. – DAS, S. – MACKŮ, J. Surface quality and cutting power requirement after edge milling of thermally modified meranti (Shorea spp.) wood. ..., 2020, roč. 29, č. 2020, s. 1-13. ISSN: N.

REZAEI, F. – GAFF, M. – SETHY, A. – NIEMZ, P. – KAMBOJ, G. – DITOMMASO, G. – CORLETO, R. – DAS, S. – GAŠPARÍK, M. Surface quality measurement by contact and laser methods on thermally modified spruce wood after plain milling. International Journal of Advanced Manufacturing Technology, 2020, roč. 110, č. 5-6, s. 1653-1663. ISSN: 0268-3768.

KVIETKOVÁ, M. – GAFF, M. – GAŠPARÍK, M. – KAPLAN, L. – BARCÍK, Š. Surface quality of milled birch wood after thermal treatment at various temperatures. BioResources, 2015, roč. 10, č. 4, s. 6512-6521. ISSN: 1930-2126.

SEDLECKÝ, M. Surface Roughness of Medium-Density Fiberboard (MDF) and Edge-Glued Panel (EGP) After Edge Milling. BioResources, 2017, roč. 12, č. 4, s. 8119-8133. ISSN: 1930-2126.